Downloads
Side Injector Hole Plug
When the injector is in central location, the hole available for the side injector is plugged with a dummy injector that has the details shown in Fig. 1.
Figure 1: Dummy injector details
Hydrogen Engine Specs with GM Head
Date: 11/13/2009 |
||
Measurements by: Victor M. Salazar |
||
Variable | Value | Comments |
| Vchamber [cc] | 45.25 | Chamber volume measured on: 09-04-2008 |
| Dliner [mm] | 92 | Liner diameter |
| S [mm] | 85 | Stroke |
| Vdisp [cc] | 565.05 | Displacement volume |
| Lcr [mm] | 166.67 | Connecting rod length |
| Piston pin offset [mm] | 1.57 | |
| Dw [mm] | 65 | Piston window diameter |
Piston: low ring pack (High Crevice) |
||
| L [mm] | 26.20 | Top land crevice height |
| h [mm] | 1.24 | Piston-pent roof clearance |
| Dp [mm] | 91.15 | Piston diameter |
| Vsquish [cc] | 8.27 | Squish volume |
| Vcrevice [cc] | 3.20 | Crevice volume |
| CR | 10.96 | Compression ratio |
Piston: high ring pack (Low Crevice) |
||
| L [mm] | 6.47 | Top land crevice height |
| h [mm] | 1.68 | Piston-pent roof clearance |
| Dp [mm] | 91.30 | Piston diameter |
| Vsquish [cc] | 11.14 | Squish volume |
| Vcrevice [cc] | 0.65 | Crevice volume |
| CR | 10.91 | Compression ratio |
Diagrams
