Author Date Title Source Additional Comments
Turbulent Nonpremixed Flame Workshop. “-“ “-“
Abraham J., Pickett L.M. 2010 Computed and Measured Fuel Vapor Distribution in a Diesel Spray Atomization and Sprays “-“
Alharbi A.Y., Sick V. 2010 Investigation of boundary layers in internal combustion engines using a hybrid algorithm of high speed micro-PIV and PTV Experiment in Fluids “-“
Allison S.W., Gillies G.T. 1997 Remote thermometry with thermographic phosphors: Instrumentation and applications Review of Scientific Instruments “-“
Azimov U., Kawahara N., Tomita E., Tsuboi K. 2010 Evaluation of the Flame Lift-off Length in Diesel Spray Combustion Based on Flame Extinction Journal of Thermal Science and Technology “-“
Azimov, Ulugbek Kawahara, Nobuyuki Tomita, Eiji Tsuboi, Kazuya 2010 Evaluation of the Flame Lift-off Length in Diesel Spray Combustion Based on Flame Extinction Journal of Thermal Science and Technology “-“
Azimov, Ulugbek Kim, Ki-Seong Bae, Choongsik 2010 Modeling of flame lift-off length in diesel low-temperature combustion with multi-dimensional CFD based on the flame surface density and extinction concept COMBUSTION THEORY AND MODELLING “-“
Baby X. 2002 A New Methodology to Analyze Cycle-to-Cycle Aerodynamic Variations SAE Paper “-“
Baert R., Frijters P., Somers B., Luijten C. 2009 Design and operation of a high pressure, high temperature cell for HD diesel spray diagnostics: guidelines and results SAE Paper “-“
Bajaj C., Abraham J., Pickett L.M. 2011 The Role of Vaporization in Determining Transient Diesel Spray Structure Paper to be presented at the 23rd annual ILASS Americas meeting, Ventura, CA, May 15-18 “-“
Bardi M., Payri R., Malbec L.-M., Bruneaux G., Pickett L. M., Manin J., Bazyn T., and Genzale C.L. 2012 Engine Combustion Network (ECN): Comparison of Spray Development, Vaporization and Combustion in Different Combustion Vessels Atomization and Sprays “-“
Bardi, Michele Payri, Raul Malbec, Louis Marie Bruneaux, Gilles Pickett, Lyle M. Manin, Julien Bazyn, Tim Genzale, Caroline 2012 ENGINE COMBUSTION NETWORK: COMPARISON OF SPRAY DEVELOPMENT, VAPORIZATION, AND COMBUSTION IN DIFFERENT COMBUSTION VESSELS ATOMIZATION AND SPRAYS “-“
Bazyn T., Martin G.C. 2011 Spray combustion measurements in a flow-through high temperature, high pressure chamber ILASS-Americas 23rd Annual Conference on Liquid Atomization and Spray Systems, Ventura, USA “-“
Bekdemir C., Rijk E., Somers B., de Goey P. 2010 On the Application of the Flamelet Generated Manifold (FGM) Approach to the Simulation of an Igniting Diesel Spray SAE “-“
Benajes J., Payri R., Bardi M., and Mart 2013 Experimental characterization of diesel ignition and lift-off length using a single-hole ECN injector Applied Thermal Engineering “-“
Benajes, Jesus Payri, Raul Bardi, Michele Marti-Aldaravi, Pedro SEP 2013 Experimental characterization of diesel ignition and lift-off length using a single-hole ECN injector Applied Thermal Engineering “-“
Berm?dez V., Payri R., Salvador F.J., Plazas A.H. 2005 Study of the influence of nozzle seat type on injection rate and spray behaviour ImechE. Journal of automobile engineering. Part D “-“
Bizon K., et al. 2009 POD-based analysis of cycle-to-cycle variations in an optically accessible diesel engine Proceedings of the Combustion Institute “-“
Bizon K., et al. 2010 POD-based analysis of combustion images in optically accessible engines Combustion and Flame “-“
Blessinger M., Meijer M., Pickett L.M., Manin J., and Skeen S., 2013 Liquid/Vapor Penetration and Plume-Plume Interaction of Vaporization Iso-Octane and Ethanol SIDI Sprays ILASS Americas, 25th Annual Conference on Liquid Atomization and Spray Systems, Pittsburgh, PA, May 2013. “-“
Blessinger, M., Manin, J., Skeen, S.A., Meijer, M., Parrish, S., and Pickett, L.M., 2014 Quantitative mixing measurements and stochastic variability of a vaporizing gasoline direct-injection spray International Journal of Engine Research “-“
Borghesia G., Mastorakos E., Devaud C.B., Bilger R.W. 2011 Modelling evaporation effects in Conditional Moment Closure for spray autoignition Combustion Theory and Modelling, in press, corr. auth: gb347@cam.ac.uk “-“
Bruneaux G. 2008 Combustion structure of free and wall-impinging diesel jets by simultaneous laser-induced fluorescence of formaldehyde, poly-aromatic hydrocarbons, and hydroxides Int. J. Engine Research “-“
Campbell J., Hardy G., Gosman A.D. 2008 Analysis of Premix Flame and Lift-Off in Diesel Spray Combustion using Multi-Dimensional CFD SAE Paper “-“
Chatterjee A. 2000 An introduction to the proper orthogonal decomposition Current Science “-“
Chen H., Reuss D.L., Sick V. 2011 Analysis of misfires in a direct injection engine using Proper-Orthogonal Decomposition Experiments in Fluids “-“
Chishty, M.A., Pei, Y., Hawkes, E.R., Bolla, M. and Kook, S., 2014 Investigation of the Flame Structure of Spray-A Using the Transported Probability Density Function in Proceedings of 18th Australasian Fluid Mechanics Conference, Launceston, Tasmania, 11/8/14 ? 11/11/14 “-“
Cordier L., Bergmann M. 2003 Proper Orthogonal Decomposition: an overview in Lecture Series 2003-04 in VKI, Post-Processing of Experimental and Numerical Data “-“
d?Errico G., Ettorre D., Lucchini T. 2007 Comparison of Combustion and Pollutant Emission Models for DI Diesel Engines SAE “-“
d?Errico G., Ettorre D., Lucchini T. 2008 Simplified and Detailed Chemistry Modeling of Constant-Volume Diesel Combustion Experiments SAE Paper “-“
d?Errico G., Lucchini T. 2011 Validation of spray and combustion models for Diesel engines using constant-volume experiments ILASS-Americas 23rd Annual Conference on Liquid Atomization and Spray Systems, Ventura, USA “-“
d?Errico G., Lucchini T., Montenegro G., Onarati A., Etorre D. 2008 Fundamental and applied studies of detailed chemistry based models for diesel combustion THIESEL 2008, Valencia, Spain “-“
Dec J.E. 1997 A conceptual model of DI diesel combustion based on laser-sheet imaging. SAE Paper “-“
Desantes J.M., Payri R., Pastor J.M., Gimeno J. 2005 Experimental characterization of internal nozzle flow and diesel spray behavior. Part I: Non evaporative conditions Atomization and Sprays “-“
Dupont A., Paranthoen P., Lecordier J.C., Gajan P. 1984 Influence of temperature on the frequency response of fine-wire thermocouples over the range (300 K-800 K) in airflow J. Phys. E: Sci. Instrum “-“
Espey C., Dec J.E., Litzinger T.A., Santavicca D.A. 1997 Planar Laser Rayleigh Scattering for Quantitative Vapor-Fuel Imaging in a Diesel Jet Combust. Flame (Mixing Measurements by Rayleigh Scattering)
Falgout, Zachary Rahm, Mattias Wang, Zhenkan Linne, Mark 2015 Evidence for supercritical mixing layers in the ECN Spray A PROCEEDINGS OF THE COMBUSTION INSTITUTE “-“
Fielding J., Frank J.H., Kaiser S.A., Smooke M.D., Long M.B. 2002 Polarized/Depolarized Rayleigh Scattering for Determining Fuel Concentrations in Flames Proc. Combust. Inst. (Mixing Measurements by Rayleigh Scattering)
Frassoldati, Alessio D’Errico, Gianluca Lucchini, Tommaso Stagni, Alessandro Cuoci, Alberto Faravelli, Tiziano Onorati, Angelo Ranzi, Eliseo OCT 2015 Reduced kinetic mechanisms of diesel fuel surrogate for engine CFD simulations COMBUSTION AND FLAME “-“
Fu, Xiao Aggarwal, Suresh K. NOV 15 2015 Fuel unsaturation effects on NOx and PAH formation in spray flames FUEL “-“
Gardiner Jr. W.C., Hikada Y., Tanzawa T. 1981 Refractivity of combustion gases Combust. Flame (Mixing Measurements by Rayleigh Scattering)
Giannadakis E., Gavaises M., Theodorakakos A. 2009 The influence of variable fuel properties in high-pressure diesel injectors SAE Paper “-“
Gong, Cheng Jangi, Mehdi Bai, Xue-Song DEC 31 2014 Large eddy simulation of n-Dodecane spray combustion in a high pressure combustion vessel APPLIED ENERGY “-“
Gopalakrishnan V.,Abraham J. 2002 An Investigation of Ignition Behavior in Diesel Sprays. Proceedings of the Combustion Institute “-“
Goryntsev D., Sadiki A., Klein M., Janicka J. 2009 Large eddy simulation based analysis of the effects of cycle-to-cycle variations on air Proc. Combust. Inst. “-“
Hawkes, E.R., Pei, Y., Kook, S. and Som, S., 2013 An analysis of the structure of an n-dodecane spray flame using PDF modelling in Proceedings of the Australian Combustion Symposium The University of Western Australia, Perth, WA, 11/6/13 ? 11/8/13 “-“
Haworth D.C. 1999 Large-Eddy Simulation of in-Cylinder Flows Oil & Gas Science and Technology ? Rev “-“
Heitor M.V.,Moreira A.L.N. 1993 Thermocouple and sample probes for combustion studies Prog. Energy Combust. Sci. “-“
Higgins B., Siebers D.L. 2000 Diesel-spray ignition and premixed burn behavior SAE Paper (Pressure-based Ignition Delay)
Higgins B., Siebers D.L. 2001 Measurement of the flame lift-off location on DI diesel sprays using OH chemiluminescence SAE Paper “-“
Holmes P.J., et al. 1997 Low-dimensional models of coherent structures in turbulence Physics Reports, 1997 “-“
Holmes P.J., Lumley J.L., Berkooz G. 1996 Turbulence, Coherent Structures, Dynamical Systems and Symmetry Cambridge, UK: Cambridge University Press. “-“
Idicheria C.A., Pickett L.M. 2005 Soot formation in diesel combustion under high-EGR conditions SAE Paper (Soot)
Idicheria C.A., Pickett L.M. 2007 Quantitative Mixing Measurements in a Vaporizing Diesel Spray by Rayleigh Imaging SAE Paper (Mixing Measurements by Rayleigh Scattering)
JetSurF ??A Jet Surrogate Fuel Model. A Jet Surrogate Fuel Model “-“ “-“
Jhavar R., Rutland C.J. 2006 Using Large Eddy Simulations to Study Mixing Effects in Early Injection Diesel Engine Combustion SAE Technical Paper “-“
Jung, Y., Manin, J., Skeen, S., Pickett L.M. 2015 Measurement of Liquid and Vapor Penetration of Diesel Sprays with a Transient Variation in Spreading Angle SAE Technical Paper (links to high-speed Spray B movies)
Jung, Y., Manin, J., Skeen, S., Pickett L.M. 2015 Assessment of the Ignition and Lift-off Characteristics of a Diesel Spray with a Transient Spreading Angle SAE(in press). (links to high-speed Spray B movies)
Karrholm F.P., Tao F., Nordin N. 2008 Three-Dimensional Simulation of Diesel Spray Ignition and Flame Lift-Off Using OpenFOAM and KIVA-3V CFD Codes SAE Paper “-“
Kashdan J.T., Thirouard B. 2009 A Comparison of Combustion and Emissions Behaviour in Optical and Metal Single-Cylinder Diesel Engines SAE International Journal of Engines “-“
Kastengren, A.L., Tilocco, F.Z., Duke, D.J., Powell, C.F., Moon, S., and Zhang, X. 2012 Time-Resolved X-ray Radiography of Diesel Injectors from the Engine Combustion Network. ICLASS 2012. (link to web page)
Kastengren, A.L., Tilocco, F.Z., Powell, C.F., Manin, J., Pickett, L.M., Payri, R., and Bazyn, T. 2012 Engine Combustion Network (ECN): Measurements of Nozzle Diameter and Hydraulic Behavior of Diesel Sprays Atomization and Sprays (Spray A injector Nozzle Geometry or Spray B injector Nozzle Geometry)
Kastengren, Alan L. Tilocco, F. Zak Powell, Christopher F. Manin, Julien Pickett, Lyle M. Payri, Raul Bazyn, Tim 2012 ENGINE COMBUSTION NETWORK (ECN): MEASUREMENTS OF NOZZLE GEOMETRY AND HYDRAULIC BEHAVIOR Atomization and Sprays “-“
Knox, B.W. Genzale, C.L., Pickett L.M., Garcia-Oliver, J., Tudela, W. 2015 Combustion Recession after End of Injection in Diesel Sprays SAE(in press). (links to high-speed movies)
Kook S., Pickett L.M. 2010 Effect of Ambient Temperature and Density on Diesel-Spray-Generated Shock Waves Atomization and Sprays (link to web page)
Kook S., Pickett L.M., Musculus M.P.B., Gehmlich R.K. 2009 Influence of Diesel Injection Parameters on End-of-Injection Liquid Length Recession SAE Int. J. Engines “-“
Kook, S. and Pickett, L.M. 2012 Soot Volume Fraction and Morphology of Conventional, Fischer-Tropsch, Coal-Derived, and Surrogate Fuel at Diesel Conditions SAE Int.J.Fuels Lubr. “-“
Kosters, Anne Karlsson, Anders Oevermann, Michael D’Errico, Gianluca Lucchini, Tommaso JAN 2 2015 RANS predictions of turbulent diffusion flames: comparison of a reactor and a flamelet combustion model to the well stirred approach COMBUSTION THEORY AND MODELLING “-“
Kundu, P., Pei, Y., Som, S., Wang, M. and Raju, M. 2014 Evaluation of Turbulence Chemistry Interaction under Diesel Engine Conditions with Multi-Flamelet RIF model Atomization and Spray “-“
Lacaze, Guilhem Misdariis, Antony Ruiz, Anthony Oefelein, Joseph C. 2015 Analysis of high-pressure Diesel fuel injection processes using LES with real-fluid thermodynamics and transport PROCEEDINGS OF THE COMBUSTION INSTITUTE “-“
Lawrence Livermore National Laboratory Physical and Life Sciences Directive “-“ “-“
Lillo, P.M., Pickett, L.M., Kook, S., Persson, H., and Andersson, 2012 Diesel Spray Ignition Detection and Spatial/Temporal Correction SAE Technical Paper “-“
Liu K., Haworth D.C. 2010 Large-eddy simulation for an axisymmetric piston-cylinder assembly with and without swirl Flow, Turbulence & Combustion “-“
Liu K., Haworth D.C. 2011 Development and Assessment of POD for Analysis of Turbulent Flow in Piston Engines SAE Paper “-“
Lucchini T., d?Errico G., Etorre D., Ferrari G. 2009 Numerical Investigation of Non-Reacting and Reacting Diesel Sprays in Constant-Volume Vessels SAE Paper “-“
Lucchini T., D?Errico G., Ettorre D. 2011 Numerical investigation of the spray International Journal of Heat and Fluid Flow “-“
Lumley J.L. 1967 The structure of inhomogeneous turbulence Atmospheric Turbulence and Wave Propagation “-“
M. Meijer, B. Somers, J. Johnson, J. Naber, S.-Y. Lee, L.-M. Malbec, G. Bruneaux, L. M. Pickett, M. Bardi, R. Payri, and T. Bazyn 2012 Engine Combustion Network (ECN): Characterization and Comparison of Boundary Conditions for Different Combustion Vessels. Atomization and Sprays “-“
Macian V., Berm 2003 New technique for the determination of the internal geometry of Diesel nozzle with the use of the silicone methodology Experimental Techniques “-“
Malbec L.-M.,Bruneaux G. 2010 Study of Air Entrainment of Multi-Hole Diesel Injection by Particle Image Velocimetry-Effect of Neighboring Jets Interaction and Transient Behavior After End of Injection SAE Paper “-“
Manin, J., Bardi, M., and Pickett, L.M. 2012 Evaluation of the liquid length via diffused back-illumination imaging in vaporizing diesel sprays COMODIA “-“
Manin, J., Bardi, M., Pickett, L.M., and Payri, R. 2013 Boundary condition and fuel composition effects on injection processes of diesel sprays at the microscopic leve ILASS-Europe 2013, Chania, Greece “-“
Manin, J., Bardi, M., Pickett, L.M., Dahms, R., and Oefelein, J.C. 2012 Development and mixing of diesel sprays at the microscopic level from low to high temperature and pressure conditions Thiesel (link to web page)
Manin, J., Bardi, M., Pickett, L.M., Dahms, R., and Oefelein, J.C. 2014 Microscopic investigation of the atomization and mixing processes of diesel sprays injected into high pressure and temperature environments Fuel (link to web page)
Manin, J., Bardi, M., Pickett, L.M., Payri, R. 2016 Boundary condition and fuel composition effects on injection processes of high-pressure sprays at the microscopic level International Journal of Multiphase Flow “-“
Manin, J., Kastengren, A., and Payri, R. 2012 Understanding the Acoustic Oscillations Observed in the Injection Rate of a Common-Rail Direct Injection Diesel Injector Journal of Engineering for Gas Turbines and Power “-“
Manin, J., Pickett, L.M., and Skeen, S.A. 2013 Two-Color Diffused Back-Illumination Imaging as a Diagnostic for Time-Resolved Soot Measurements in Reacting Sprays SAE Paper “-“
Manin, Julien Kastengren, Alan Payri, Raul DEC 2012 Understanding the Acoustic Oscillations Observed in the Injection Rate of a Common-Rail Direct Injection Diesel Injector Journal of Engineering for Gas Turbines and Power “-“
Manin, Julien Kastengren, Alan Payri, Raul GP ASME 2012 UNDERSTANDING THE ACOUSTIC OSCILLATIONS OBSERVED IN THE INJECTION RATE OF A COMMON-RAIL DI DIESEL INJECTOR Journal of Engineering for Gas Turbines and Power “-“
Meijer, Maarten Somers, Bart Johnson, Jaclyn Naber, Jeffrey Lee, Seong-Young Malbec, Louis Marie Bruneaux, Gilles Pickett, Lyle M. Bardi, Michele Payri, Raul 2012 ENGINE COMBUSTION NETWORK (ECN): CHARACTERIZATION AND COMPARISON OF BOUNDARY CONDITIONS FOR DIFFERENT COMBUSTION VESSELS Atomization and Sprays “-“
Miles P.C., Gouldin F.C. 1992 Determination of the time constant of fine-wire thermocouples for compensated temperature measurements in premixed turbulent flames Combust. Sci. Tech. “-“
Mueller C.J., Pitz W.J., Pickett L.M., Martin G.C., Siebers D.L., Westbrook C.K. 2003 Effects of oxygenates on soot processes in DI diesel engines: Experimental and numerical simulations SAE Paper “-“
Musculus M.P.B., Kattke K. 2009 Entrainment waves in diesel jets SAE Int.J.Engines “-“
Musculus M.P.B., Lachaux T., Pickett L.M., Idicheria C.A. 2007 End-of-injection over-mixing and unburned hydrocarbon emissions in low-temperature-combustion diesel engines SAE Paper “-“
Musculus M.P.B., Pickett L.M. 2005 Diagnostic considerations for optical laser-extinction measurements of soot in high-pressure transient combustion environments Combust. Flame “-“
Naber J.D., Siebers D.L. 1996 Effects of gas density and vaporization on penetration and dispersion of diesel sprays SAE Paper (Gasoline Jet Penetration or High-Speed Movies & Flow Visualization or Pressure-based Ignition Delay)
Novella R., Garc 2011 The role of detailed chemical kinetics on CFD diesel spray ignition and combustion modelling Mathematical and Computer Modelling “-“
Oefelein J.C. 2006 Large eddy simulation of turbulent combustion processes in propulsion and power systems Progress in Aerospace Sciences “-“
Paranthoen P., Petit C., Lecordier J.C. 1982 The effect of the thermal prong-wire interaction on the response of a cold wire in gaseous flows (air, argon and helium) J. Fluid Mech. “-“
Pastor, J. V. Garcia-Oliver, J. M. Lopez, J. J. Vera-Tudela, W. JAN 1 2016 An experimental study of the effects of fuel properties on reactive spray evolution using Primary Reference Fuels FUEL “-“
Payri F., Berm 2004 The influence of cavitation on the internal flow and the spray characteristics in diesel injection nozzles J. Fluid Mech. “-“
Payri R., Garcia J.M., Manin J., Bardi M. 2011 Fuel temperature influence on Diesel sprays in reacting conditions ILASS Americas, May 2011, Ventura CA “-“
Payri R., Garcia J.M., Salvador F.J., Gimeno J. 2005 Using spray momentum flux measurements to understand the influence of diesel nozzle geometry on spray characteristics Fuel “-“
Payri R., Molina S., Salvador F.J., Gimeno J. 2004 A study of the relation between nozzle geometry, internal flow and sprays characteristics in diesel fuel injection systems KSME Internacional Journal “-“
Payri R., Salvador F.J., Gimeno J., Bracho G. 2008 A new methodology for correcting the signal cumulative phenomenon on injection rate measurements Experimental techniques “-“
Payri R., Salvador F.J., Gimeno J., de la Morena J. 2009 Effects of nozzle geometry on direct injection diesel engine combustion process Applied Thermal Engineering “-“
Payri R., Salvador F.J., Gimeno J., De la Morena J. 2011 Influence of injector technology on injection and combustion development Applied Energy “-“
Payri R., Salvador F.J., Gimeno J., Soare V. 2005 Determination of diesel sprays characteristics in real engine in-cylinder air density and pressure conditions Journal of Mechanical Science and Technology “-“
Payri, F. Payri, R. Bardi, M. Carreres, M. FEB 2014 Engine combustion network: influence of the gas properties on the spray penetration and spreading angle EXPERIMENTAL THERMAL AND FLUID SCIENCE “-“
Payri, R., Salvador, F.J., Gimeno, J., and Morena, de la J. 2008 Macroscopic behavior of diesel sprays in the near-nozzle field SAE Paper “-“
Payri, Raul Salvador, F. J. Manin, Julien Viera, Alberto JAN 15 2016 Diesel ignition delay and lift-off length through different methodologies using a multi-hole injector APPLIED ENERGY “-“
Payri, Raul Viera, Juan Pablo Pei, Yuanjiang Som, Sibendu OCT 15 2015 Experimental and numerical study of lift-off length and ignition delay of a two-component diesel surrogate FUEL “-“
Pei Y., Hawkes E. R., & Kook S. 2012 Transported probability density function modelling of the vapour phase of an n-heptane jet at diesel engine conditions Proceedings of the Combustion Institute “-“
Pei Y., Hawkes E. R., & Kook S. 2013 A Comprehensive Study of Effects of Mixing and Chemical Kinetic Models on Predictions of n-heptane Jet Ignitions with the PDF Method Flow, Turbulence and Combustion “-“
Pei, Y., Davis, M.J., Pickett, L.M. and Som, S. 2015 Engine Combustion Network (ECN): Global sensitivity analysis of Spray A for different combustion vessels Combustion and Flame (View journal)
Pei, Y., Hawkes, E.R. and Kook, S., 2012 Lagrangian?Lagrangian Modelling of an N-heptane Jet at Diesel Engine Conditions in Proceedings of 18th Australasian Fluid Mechanics Conference, Launceston, Tasmania “-“
Pei, Y., Hawkes, E.R., Kook, S., Goldin, G. and Lu, T. 2015 Modelling n-dodecane spray and combustion with the transported probability density function method Combustion and Flame (View journal)
Pei, Y., Mehl, M., Liu, W., Lu, T., Pitz, W.J. and Som, S. 2014 A multi-component blend as a diesel fuel surrogate for compression ignition engine applications in Proceedings of ASME 2014 Internal Combustion Engine Division Fall Technical Conference “-“
Pei, Yuanjiang Davis, Michael J. Pickett, Lyle M. Som, Sibendu JUN 2015 Engine Combustion Network (ECN): Global sensitivity analysis of Spray A for different combustion vessels Combustion and Flame “-“
Pei, Yuanjiang Mehl, Marco Liu, Wei Lu, Tianfeng Pitz, William J. Som, Sibendu NOV 2015 A Multicomponent Blend as a Diesel Fuel Surrogate for Compression Ignition Engine Applications JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME “-“
Pei, Yuanjiang Mehl, Marco Liu, Wei Lu, Tianfeng Pitz, William J. Som, Sibendu GP ASME 2014 A MULTI-COMPONENT BLEND AS A DIESEL FUEL SURROGATE FOR COMPRESSION IGNITION ENGINE APPLICATIONS PROCEEDINGS OF THE ASME INTERNAL COMBUSTION ENGINE DIVISION, FALL TECHNICAL CONFERENCE, 2014, VOL 2 “-“
Peterson B., Reuss D.L., Sick V. 2011 High-speed imaging analysis of misfires in a spray-guided direct injection engine Proceedings of the Combustion Institute “-“
Petit C., Gajan P., Lecordier J.C., Paranthoen, P. 1982 Frequency response of fine-wire thermocouple J. Phys. E: Sci. Instrum. “-“
Pickett L.M., Caton J.A., Musculus M.P.B., Lutz A.E. 2006 Evaluation of the equivalence ratio-temperature region of diesel soot precursor formation using a two-stage Lagrangian model. Int. J. Engine Res. “-“
Pickett L.M., Genzale C.L., Bruneaux G., Malbec L.-M., Hermant L., Christiansen C., Schramm J. 2010 Comparison of diesel spray combustion in different high-temperature, high-pressure facilities SAE Int. J. Engines “-“
Pickett L.M., Kook S., Persson H., Andersson O. 2009 Diesel fuel jet lift-off stabilization in the presence of laser-induced plasma ignition Proc. Combust. Inst. “-“
Pickett L.M., Kook S., Williams T.C. 2009 Visualization of Diesel Spray Penetration, Cool-Flame, Ignition, High-Temperature Combustion, and Soot Formation Using High-Speed Imaging SAE Int. J. Engines (High-Speed Movies & Flow Visualization)
Pickett L.M., Kook S., Williams T.C. 2009 Transient liquid penetration of early-injection diesel sprays SAE Paper “-“
Pickett L.M., Manin J., Genzale C.L., Siebers D.L., Musculus M.P.B., Idicheria C.A. 2011 Relationship between diesel fuel spray vapor penetration/dispersion and local fuel mixture fraction SAE Int. J. Engines “-“
Pickett L.M., Siebers D.L. 2003 Fuel effects on soot processes of fuel jets at DI diesel conditions. SAE Paper “-“
Pickett L.M., Siebers D.L. 2004 Soot in diesel fuel jets: effects of ambient temperature, ambient density, and injection pressure Combust. Flame “-“
Pickett L.M., Siebers D.L. 2006 Soot formation in diesel fuel jets near the lift-off length (Soot)
Pickett L.M., Siebers D.L., Idicheria C.A. 2005 Relationship between ignition processes and the lift-off length of diesel fuel jets SAE Paper “-“
Pickett, L.M., Genzale, C.L., Manin, J., Malbec, L.-M., and Hermant, L. 2011 Measurement Uncertainty of Liquid Penetration in Evaporating Diesel Sprays ILASS 2011-111 “-“
Pickett, L.M., Manin, J., Kastengren, A.L., and Powell, C.F. 2014 Comparison of Near-Field Structure and Growth of a Diesel Spray Using Light-Based Optical Microscopy and X-Ray Radiography SAE (link to web page)
Pickett, L.M., Manin, J., Payri, R., Bardi, M., Gimeno, J. 2013 Transient Rate of Injection Effects on Spray Development SAE “-“
Quan, S., Dai, M., Pomraning, E., Senecal, P. et al, 2014 Numerical Simulations of Supersonic Diesel Spray Injection and the Induced Shock Waves SAE Int. J. Engines (LDM page or LDM vs xray or?Shockwave page)
Raju, Mandhapati Wang, Mingjie Senecal, P. K. Som, Sibendu Longman, Douglas E. GP ASME 2012 A REDUCED DIESEL SURROGATE MECHANISM FOR COMPRESSION IGNITION ENGINE APPLICATIONS PROCEEDINGS OF THE ASME INTERNAL COMBUSTION ENGINE DIVISION FALL TECHNICAL CONFERENCE “-“
Rayri, R., Viera, J.P., Pei, Y. and Som, S. 2014 Experimental and numerical study of lift-off length and ignition delay of a two-component diesel surrogate Fuel (View journal)
Reuss D.L., Adrian R.J., Landreth C.C., French D.T., Fansler T.D. 1989 Instantaneous Planar Measurements of Velocity and Large-Scale Vorticity and Strain Rate in an Engine Using Particle-Image Velocimetry SAE Technical Paper “-“
Reuss D.L., Kuo T., Khalighi B., Haworth D., Rosalik M. 1995 Particle Image Velocimetry Measurements in a High-Swirl Engine Used for Evaluation of Computational Fluid Dynamics Calculations SAE Technical Paper “-“
Roudnitzky S., Druault P., Guibert P. 2006 Proper orthogonal decomposition of in-cylinder engine flow into mean component, coherent structures and random Gaussian fluctuations Journal of Turbulence “-“
Saha, Kaushik Som, Sibendu Battistoni, Michele Li, Yanheng Quan, Shaoping Senecal, Peter Kelly GP IOP 2015 Numerical simulation of internal and near-nozzle flow of a gasoline direct injection fuel injector 9TH INTERNATIONAL SYMPOSIUM ON CAVITATION (CAV2015) “-“
Settles G.S. 2001 Schlieren and Shadowgraph Techniques Springer-Verlag “-“
Sick V., Drake M.C., Fansler T.D. 2010 High-speed imaging for direct-injection gasoline engine research and development Experiments in Fluids “-“
Sick V., et al. 2010 A Common Engine Platform for Engine LES Development and Validation in LES4ICE, C. Angelberger, Editor 2010, IFP Energies Nouvelles: Rueil-Malmaison, France “-“
Siebers D.L. 1985 Ignition Delay Characteristics of Alternative Diesel Fuels: Implications on Cetane Number Trans. of the SAE “-“
Siebers D.L. 1998 Liquid-phase fuel penetration in diesel sprays SAE Paper 980809 (Siebers Liquid Penetration Length)
Siebers D.L. 1999 Scaling liquid-phase fuel penetration in diesel sprays based on mixing-limited vaporization SAE Paper “-“
Siebers D.L., Higgins B. 2001 Flame lift-off on direct-injection diesel sprays under quiescent conditions SAE Paper “-“
Siebers D.L., Higgins B., Pickett L.M. 2002 Flame lift-off on direct-injection diesel fuel jets: oxygen concentration effects SAE Paper “-“
Sik, Bae Choong AU ??? ??? 2014 Spray and Combustion Characteristics of n-dodecane in a Constant Volume Combustion Chamber for ECN Research Z1 ECN ??? ?? ?? ?? ?????? n-dodecane ?? ? ?? ?? Journal of ILASS-Korea “-“
Skeen S.A., Manin, J., Dalen, K.R., Ivarsson, A.I., Pickett L.M. 2014 Quantitative spatially resolved measurements of total radiation in high-pressure spray flames SAE Paper “-“
Skeen S.A., Manin, J., Dalen, K.R., Pickett L.M. 2013 Extinction-based imaging of soot processes over a range of diesel operating conditions 8th U.S. National Combustion Meeting, May 19-22, 2013 (Please contact authors as this is a non-archival publication.)
Skeen S.A., Manin, J., Pickett L.M. 2014 Simultaneous formaldehyde PLIF and high-speed schlieren imaging for ignition visualization in high-pressure spray flames Proceedings of the Combustion Institute (in press), 2014 (links to high-speed movies)
Som S., Aggarwal S.K 2010 Effects of primary breakup modeling on spray and combustion characteristics of compression ignition engines Combustion and Flame “-“
Som S., Longman D.E., Luo Z., Plomer M., Lu T., Senecal P.K., Pomraning E. 2011 Simulating flame lift-off characteristics of diesel and biodiesel fuels using detailed chemical-kinetic mechanisms and LES turbulence model ICEF2011-60051, ASME Internal Combustion Engine Division Fall Technical Conference, Morgantown, October 2011 “-“
Sutton J.A., Driscoll J.F. 2004 Rayleigh scattering cross sections of combustion species at 266, 355, and 532 nm for thermometry applications Opt. Lett. (Mixing Measurements by Rayleigh Scattering)
Tillou, J. Michel, J. -B. Angelberger, C. Bekdemir, C. Veynante, D. JAN-FEB 2014 Large-Eddy Simulation of Diesel Spray Combustion with Exhaust Gas Recirculation OIL & GAS SCIENCE AND TECHNOLOGY-REVUE D IFP ENERGIES NOUVELLES “-“
Torelli, R. D’Errico, G. Lucchini, T. Ikonomou, V. McDavid, R. M. 2015 A SPHERICAL VOLUME INTERACTION DDM APPROACH FOR DIESEL SPRAY MODELING ATOMIZATION AND SPRAYS “-“
Venugopal R., Abraham J. 2007 A Review of Fundamental Studies Relevant to Flame Lift-Off in Diesel Jets SAE Transactions, Journal of Engines “-“
Venugopal R., Abraham J. 2007 A Numerical Investigation of Flame Lift-Off in Diesel Jets Combustion Science and Technology “-“
Vishwanathan G., Reitz R. 2008 Numerical Predictions of Diesel Flame Lift-off Length and Soot Distributions Under Low Temperature Combustion Conditions SAE Paper “-“
Vishwanathan G., Reitz R. 2009 Modeling soot formation using reduced polycyclic aromatic hydrocarbon chemistry in n-heptane lifted flames with application to low temperature combustion J. of Engineering for Gas Turbines and Power “-“
Vishwanathan G., Reitz R. 2010 Development of a practical soot modeling approach and its application to low temperature diesel combustion Combustion Science and Technology “-“
Wang Y., Ge H.-W., Reitz R. 2010 Validation of Mesh- and Timestep-Independent Spray Models for Multidimensional Engine CFD Simulations SAE Int. J. Fuels Lubr “-“
Wang, Hu Ra, Youngchul Jia, Ming Reitz, Rolf D. NOV 15 2014 Development of a reduced n-dodecane-PAH mechanism and its application for n-dodecane soot predictions FUEL “-“
Williams, T.C., Shaddix, C.R., Jensen, K.A., and Suo-Anttila, J.M. 2007 Measurement of the dimensionless extinction coefficient of soot within laminar diffusion flames International Journal of Heat and Mass Transfer (Soot)
Xue, Q. Som, S. Senecal, P. K. Pomraning, E. 2013 LARGE EDDY SIMULATION OF FUEL-SPRAY UNDER NON-REACTING IC ENGINE CONDITIONS ATOMIZATION AND SPRAYS “-“
Zhu J., Choi M.Y., Mulholland G.W., Manzello S.L., Gritzo L.A., Suo-Anttila J. 2002 Measurement of visible and near-IR optical properties of soot produced from laminar flames Proc. Combust. Inst. (Soot)
Julien Manin, Yongjin Jung, Scott A. Skeen, Lyle M. Pickett, Scott E. Parrish, and Lee Markle SEPT 1 2015 Experimental Characterization of DI Gasoline Injection Processes SAE Paper (2015-01-1894)
Skeen, S., Manin, J., Pickett, L., Cenker, E. et al. 2016 A Progress Review on Soot Experiments and Modeling in the Engine Combustion Network (ECN) SAE Int. J. Engines Link to Paper