Movies for the publication “Diesel injector elasticity effects on internal nozzle flow” by Yasutomi et al. 2019 are given below.
| Transparent nozzle imaging of Spray A style sac and nozzle (Fig. 4a) | TranspNozzleSprayA | |
| Transparent nozzle imaging of Spray C/D (Fig. 4b) | TranspNozzleSprayCD | |
| Suction of droplet into injector | Spray A injector. Second injection into 29 bar, 440 K. | Droplet Suction |
| CFD simulation of total density at central cut plane using original measured needle movement (Fig. 8a) | CFD Original Lift | |
| CFD simulation of total density at central cut plane with 5 micrometer correction (Fig. 8b) | CFD 5 micrometer correction | |
| CFD simulation of total density at central cut plane with 10 micrometer correction (Fig. 8c) | CFD 10 micrometer correction | |
| Spray visualization of hot Spray C injector. 150 MPa into 1 atm (Fig. 13) | image width is 50 mm | Spray C penetration |