The following table is a complete collection of talks and presentations that were recorded since ECN1. Please use the built-in search function on the top-right corner of the table to find what you’re looking for.
| Meeting | Date | Links | Start Time | Topic | Presenter | Group |
|---|---|---|---|---|---|---|
| ECN 1.0 | 13-May-11 | Link | #0 | Overview of Spray A | Gilles Bruneaux | IFPEN |
| ECN 1.0 | 13-May-11 | Link | #0 | Vessel Temperature | Maarten Meijer | TU/e |
| ECN 1.0 | 13-May-11 | Link | #0 | Ambient Composition | Jaclyn Nesbitt | MTU |
| ECN 1.0 | 13-May-11 | Link | #0 | Nozzle and Injector Temperature | Louis-Marie Malbec | IFPEN |
| ECN 1.0 | 13-May-11 | Link | #0 | Nozzle Geometry | Alan Kastengren | Argonne |
| ECN 1.0 | 13-May-11 | Link | #0 | Hydraulic Characterization | Raul Payri | CMT |
| ECN 1.0 | 13-May-11 | Link | #0 | Liquid Length | Caroline Genzale | Georgia Institute of Technology |
| ECN 1.0 | 13-May-11 | Link | #0 | Vapor Penetration | Tim Bazyn | Caterpillar |
| ECN 1.0 | 13-May-11 | Link | #0 | Combustion | Lyle Pickett | Sandia |
| ECN 1.0 | 13-May-11 | Link | #0 | Spray A | Sibendu Som | Argonne |
| ECN 1.0 | 13-May-11 | Link | #0 | Baseline n-heptane | Evatt Hawkes | UNSW |
| ECN 1.5 | 25-Jan-12 | Link | 0:00:45 | Ignition and lift-off sub-group | Evatt Hawkes | UNSW |
| ECN 1.5 | 25-Jan-12 | Link | 0:05:35 | Ignition and lift-off length group | Michele Bardi | CMT |
| ECN 1.5 | 25-Jan-12 | Link | 0:22:12 | Spray A and Spray B combustion as a function of ambient temperature | Lyle Pickett | Sandia |
| ECN 1.5 | 25-Jan-12 | Link | 0:47:02 | Preparation for ECN2 | Evatt Hawkes | UNSW |
| ECN 1.5 | 25-Jan-12 | Link | 0:56:29 | Spray A Soot Formation for Seven Different Fuels | Sanghoon Kook | UNSW |
| ECN 1.5 | 25-Jan-12 | Link | 1:25:36 | Soot formation modeling of n-Heptane sprays | Michele Bolla | ETH |
| ECN 1.5 | 25-Jan-12 | Link | 1:43:21 | Soot Data Collection Needs | Dan Haworth | Penn State |
| ECN 1.5 | 25-Jan-12 | Link | 1:51:54 | Soot Measurements | Emre Cenker | IFPEN/DUE |
| ECN 1.5 | 25-Jan-12 | Link | 2:01:48 | ECN website | Lyle Pickett | Sandia |
| ECN 1.5 | 26-Jan-12 | Link | 0:00:00 | Gasoline Spray | Scott Parrish | GM |
| ECN 1.5 | 26-Jan-12 | Link | 0:36:17 | Engines for the Engine Combustion Network | Sebastian Kaiser | UDE |
| ECN 1.5 | 26-Jan-12 | Link | 1:14:07 | Chamber Upgrade for Spray A/B of ECN | Maung Maung Aye | RWTH Aachen University |
| ECN 1.5 | 26-Jan-12 | Link | 1:28:13 | Boundary condition experimentation | Maarten Meijer | TU/e |
| ECN 1.5 | 26-Jan-12 | Link | 1:49:22 | Logistics for ECN2 | Gilles Bruneaux | IFPEN |
| ECN 2.0 | 7-Sep-12 | Link | #0 | Overall Summary | N/A | N/A |
| ECN 2.0 | 7-Sep-12 | Link | #0 | Introduction Presentation | N/A | N/A |
| ECN 2.0 | 7-Sep-12 | Link | 0:00:32 | Engine Flows | Sebastian Kaiser | Duisburg-Essen |
| ECN 2.0 | 7-Sep-12 | Link | #0 | Engine Flows Summary | N/A | N/A |
| ECN 2.0 | 7-Sep-12 | Link | 1:06:07 | Generating CFD Nozzle Geometries from Experimental Measurements: Spray A Injectors | Caroline Genzale | Georgia Institute of Technology |
| ECN 2.0 | 7-Sep-12 | Link | 1:21:19 | Internal Injector Modeling | David Schmidt | UMass-Amherst |
| ECN 2.0 | 7-Sep-12 | Link | #0 | Internal Nozzle Flow: Summary and Presentation | N/A | N/A |
| ECN 2.0 | 7-Sep-12 | Link | 1:45:50 | Internal Flow | Marco Arienti | Sandia |
| ECN 2.0 | 7-Sep-12 | Link | 0:09:40 | Spray Development and Vaporization Session | Julien Manin | Sandia |
| ECN 2.0 | 7-Sep-12 | Link | #0 | Spray Development and Vaporization Summary pdf | N/A | N/A |
| ECN 2.0 | 7-Sep-12 | Link | N/A | Spray Development and Vaporization: Presentation zip file | N/A | N/A |
| ECN 2.0 | 7-Sep-12 | Link | 0:00:00 | Mixing and Velocity | Louis-Marie Malbec | IFPEN |
| ECN 2.0 | 7-Sep-12 | Link | #0 | Mixing and Velocity Summary pdf | Louis-Marie Malbec/Gianluca D'Ericco | IFPEN/Politecnico di Milano-Italy |
| ECN 2.0 | 7-Sep-12 | Link | N/A | Mixing and Velocity: Presentation zip file | N/A | N/A |
| ECN 2.0 | 7-Sep-12 | Link | 1:34:46 | Gasoline Sprays | Scott Parrish | GM |
| ECN 2.0 | 7-Sep-12 | Link | #0 | Gasoline Sprays: Summary and presentation | N/A | N/A |
| ECN 2.0 | 8-Sep-12 | Link | 0:00:20 | Soot | Emre Cenker | Duisburg-Essen/IFPEN |
| ECN 2.0 | 8-Sep-12 | Link | #0 | Soot: Summary and presentation | N/A | N/A |
| ECN 2.0 | 8-Sep-12 | Link | 0:00:00 | Ignition and Lift-off Length | Michele Bardi | CMT |
| ECN 2.0 | 8-Sep-12 | Link | #0 | Ignition and Lift-off Length Summary pdf | N/A | N/A |
| ECN 2.0 | 8-Sep-12 | Link | N/A | Ignition and Lift-off Length: Presentation zip file | N/A | N/A |
| ECN 2.0 | 8-Sep-12 | Link | 0:00:00 | Soot and Future Directions | N/A | N/A |
| ECN 2.0 | 8-Sep-12 | Link | #0 | Future Plans Presentation | N/A | N/A |
| ECN 2.3 | 25-Mar-13 | Link | 0:00:00 | Presentation of the agenda | Raul Payri | CMT |
| ECN 2.3 | 25-Mar-13 | Link | 0:01:45 | ESRF geometry experiments | Peter Hutchins | Infineum |
| ECN 2.3 | 25-Mar-13 | Link | 0:12:00 | High-speed schlieren visualization of the Lift-off Length | Francisco Briceño | CMT |
| ECN 2.3 | 25-Mar-13 | Link | 0:26:35 | Lift-off length and ignition delay database | Michele Bardi | CMT |
| ECN 2.3 | 25-Mar-13 | Link | 0:39:20 | Ambient temperature characterization at Spray A | Maarten Meijer | Sandia |
| ECN 2.3 | 25-Mar-13 | Link | 0:53:00 | PIV measurements | Louis-Marie | IFPEN |
| ECN 2.3 | 25-Mar-13 | Link | 1:05:30 | Soot Particle sizing | Emre Cenker | IFPEN |
| ECN 2.3 | 25-Mar-13 | Link | 1:14:30 | Extinction-based imaging of soot process over a range of diesel operating conditions | Scott Skeen | Sandia |
| ECN 2.3 | 25-Mar-13 | Link | 1:32:50 | Single-hole diesel injector activity at IM/MTU | Luigi Allocca | MTU/Instituto Motori |
| ECN 2.3 | 25-Mar-13 | Link | 1:41:55 | Spray B hydraulic measurements | Juan Pablo Viera | CMT |
| ECN 2.3 | 25-Mar-13 | Link | 1:53:30 | ECN measurement campaign TU/e | Maarten Meijer | TU/e |
| ECN 2.3 | 25-Mar-13 | Link | 2:04:40 | KAIST ECN chamber setup/plan | Choongsik Bae | KAIST |
| ECN 2.3 | 25-Mar-13 | Link | 2:13:10 | New chamber | Luigi Allocca | MTU/Instituto Motori |
| ECN 2.3 | 25-Mar-13 | Link | 2:19:30 | Spray A nozzle simulations accounting for needle transience | Sibendu Som | Argonne |
| ECN 2.3 | 25-Mar-13 | Link | 2:26:35 | Spray development and vaporization modeting | Jose Manuel Pastor | CMT |
| ECN 2.3 | 25-Mar-13 | Link | 2:34:40 | Soot modeling paper | Michele Bolla | ETH Zurich |
| ECN 2.3 | 25-Mar-13 | Link | 2:44:00 | Preliminary ECN3 University of Michigan meeting Plan | David Reuss | University of Michigan |
| ECN 2.3 | 25-Mar-13 | Link | 2:47:42 | ECN3 technical plan/GDI status | Lyle M. Pickett | Sandia |
| ECN 2.3 | 25-Mar-13 | Link | 3:07:25 | Spray B and spray A injectors distribution | Lyle M. Pickett | Sandia |
| ECN 2.4 | 11-Jun-13 | Link | 0:00:00 | Introduction: ECN2.4 mechanics | Gilles Bruneaux | Argonne |
| ECN 2.4 | 11-Jun-13 | Link | 0:14:49 | High Energy Tomographic Imaging of Fuel Injector Deposits and ECN Fuel Injector Geometry Mapping | Peter Hutchins | Infineum |
| ECN 2.4 | 11-Jun-13 | Link | 0:24:06 | Spray A.2 characterization | Louis-Marie Malbec | Sandia/IFPEN |
| ECN 2.4 | 11-Jun-13 | Link | 0:34:12 | Overview of Three IC Engine Data Sets Available for Posting | David Reuss | University of Michigan |
| ECN 2.4 | 11-Jun-13 | Link | 0:44:40 | ECN3 Survey Google Sheet | Sibendu Som | Argonne |
| ECN 2.4 | 11-Jun-13 | Link | 0:55:57 | ECN Spray A PIV measurements | Raul Payri | CMT |
| ECN 2.4 | 11-Jun-13 | Link | 1:07:14 | Ballistic Imaging in the Spray Formation Region at Spray A Conditions | Mark Linne | Avancez |
| ECN 2.4 | 11-Jun-13 | Link | 1:15:50 | Ramping rate of injection effects on Spray A penetration | Lyle Pickett | Sandia |
| ECN 2.4 | 11-Jun-13 | Link | 1:26:42 | Constant Volume Chamber (CVC) for Fuel Spray Studies | Joshua Lacey | University of Melbourne |
| ECN 2.4 | 11-Jun-13 | Link | 1:32:08 | Modeling Spray A and H (FGM) | Bart Somers | TU/e |
| ECN 2.4 | 11-Jun-13 | Link | 1:41:41 | A Study of Grid Resolution and SGS Models for LES under Non-reacting Spray Conditions | Sibendu Som | Argonne |
| ECN 2.5 | 6-Aug-13 | Link | 0:00:00 | Spray experiments and data access plans leading up to ECN3 | Lyle Pickett | Sandia |
| ECN 2.5 | 6-Aug-13 | Link | 0:13:20 | Analysis of Spray A from modelled results using the TPDF method | Evatt Hawkes | UNSW/argonne |
| ECN 2.5 | 6-Aug-13 | Link | 0:34:00 | X-Ray phase contrast Investigation of ECN Spray B injectors | Alan Kastengren | Argonne |
| ECN 2.5 | 6-Aug-13 | Link | 0:50:00 | Droplets in turbulence, imaging jet breakup using phosphorescent dye | Dennis van der Voort | TU/e |
| ECN 2.5 | 6-Aug-13 | Link | 1:03:30 | Gas temperature Measurements in MTU Combustion Vessel | Anqi Zhang | MTU/Instituto Motori |
| ECN 2.5 | 6-Aug-13 | Link | 1:18:00 | Diffused back lighting standarization considerations | Scott Skeen | Sandia |
| ECN 2.5 | 6-Aug-13 | Link | 1:28:35 | Modeling Spray A internal flow with compresible HRMFoam | Maryam Moulai | UMass-Amherst |
| ECN 2.5 | 6-Aug-13 | Link | 1:41:00 | Gasoline Spray Session | Scott Parrish | GM |
| ECN 2.6 | 1-Oct-13 | Link | 0:00:30 | Comparison of near-field structure of Spray A using light-based optical microscopy and x-ray radiography | Lyle Pickett | Sandia |
| ECN 2.6 | 1-Oct-13 | Link | 0:21:00 | Soot particle sizing using LII imaging and TEM | Emre Cenker | IFPEN |
| ECN 2.6 | 1-Oct-13 | Link | 0:52:45 | Coupled nozzle flow and spray simulations of Spray A: validation against x-ray radiography data | Qinghuan Xue | Argonne |
| ECN 2.6 | 1-Oct-13 | Link | 1:03:50 | Turbulence -Chemistry interactions in Spray H and Spray A flames | Dan Haworth | Penn St. |
| ECN 2.6 | 1-Oct-13 | Link | 0:44:10 | Modeling Spray A | Maryam Moulai | UMass-Amherst |
| ECN 2.6 | 1-Oct-13 | Link | 1:12:30 | DICOM: A 1D Spray Model | Jose Maria Garcia | CMT |
| ECN 2.6 | 1-Oct-13 | Link | 1:31:35 | ECN topic planning | Lyle Pickett | Sandia |
| ECN 2.6 | 1-Oct-13 | Link | 1:44:40 | Spray B progress | Chongsik Bae | KAIST |
| ECN 2.7 | 3-Dec-13 | Link | 0:00:00 | ECN3 Preparation Meeting: Topic 2: Mixing/chemistry interaction | Jose M. Garcia-Oliver | CMT |
| ECN 2.7 | 3-Dec-13 | Link | 0:58:16 | ECN3 Topic 3: Coupled Nozzle Flow and Spray Simulations: Guidelines and Deadlines | Chawki Habchi | IFPEN |
| ECN 2.7 | 3-Dec-13 | Link | 1:09:00 | Parametric Studies: Guidance on Experiments and Simulations to be Performed | Alessandro Montanaro | CNR |
| ECN 2.7 | 3-Dec-13 | Link | 1:23:13 | ECN3 Topic 1 Session 4c: An attempt to understand the relation between spray and combustion | Yuanjiang Pei | Argonne |
| ECN 2.7 | 3-Dec-13 | Link | 1:28:44 | ECN3 Signup Process | Gilles Bruneaux | Argonne |
| ECN 2.7 | 3-Dec-13 | Link | 1:30:46 | Gasoline Spray (Spray G) ECN3 Planning | Scott Parrish | GM |
| ECN 2.7 | 3-Dec-13 | Link | 1:41:48 | ECN3 Engine Flow and Combustion Topics | David Reuss | University of Michigan |
| ECN 2.8 | 4-Feb-14 | Link | 0:00:30 | Plans for ECN3 | Lyle M. Pickett | Sandia |
| ECN 2.8 | 4-Feb-14 | Link | 0:17:44 | Combined POD of LES and PIV Measurements identifying sources of In-cylinder CCV | Dave Reuss | Michigan |
| ECN 2.8 | 4-Feb-14 | Link | 0:32:37 | Decoupling LES from Large-Error-Simulation (LES) | Satbir Singh | Carnegie Mellon |
| ECN 2.8 | 4-Feb-14 | Link | 0:43:28 | Spray G rate and duration of injection | Scott Parrish | GM |
| ECN 2.8 | 4-Feb-14 | Link | 0:57:30 | OH/formaldehyde LIF measurements | Hubert Baya Toda | IFPEN |
| ECN 2.8 | 4-Feb-14 | Link | 1:10:09 | High speed OH* measurements at spray A conditions | Maarten Meijer | TU/e |
| ECN 2.8 | 4-Feb-14 | Link | 1:18:55 | Spray A radiation | Scott Skeen | Sandia |
| ECN 2.8 | 4-Feb-14 | Link | 1:33:19 | LES of Spray A: mesh resolution and droplet breakup | Armin Wehrfritz | Aalto |
| ECN 2.8 | 4-Feb-14 | Link | 1:46:08 | On the Validation of Global and Local Spray Behavior in Modeled Vaporizing Diesel | Gina Magnotti | Georgia Tech. |
| ECN 2.8 | 4-Feb-14 | Link | 1:57:45 | Spray A RIF modeling | Yuanjiang Pei | Argonne |
| ECN 3.0 | 4-Apr-14 | Link | #0 | Overall Summary | Lyle Pickett/Gilles Bruneaux/Raul Payri | Sandia/IFPEN/CMT |
| ECN 3.0 | 4-Apr-14 | Link | 0:00:00 | Introduction/Diesel 1.1-1.2 | Lyle Pickett/Gilles Bruneaux/Raul Payri | Sandia/IFPEN/CMT |
| ECN 3.0 | 4-Apr-14 | Link | #0 | Introduction presentation | Lyle Pickett/Gilles Bruneaux/Raul Payri | Sandia/IFPEN/CMT |
| ECN 3.0 | 5-Apr-14 | Link | 2:45:00 | Future plans | Lyle Pickett/Gilles Bruneaux/Raul Payri | Sandia/IFPEN/CMT |
| ECN 3.0 | 5-Apr-14 | Link | #0 | Future Plans Presentation | Lyle Pickett/Gilles Bruneaux/Raul Payri | Sandia/IFPEN/CMT |
| ECN 3.0 | 4-Apr-14 | Link | 0:00:00 | Topic 1.3: Evaporative spray and parametric studies | Tommaso Lucchini/Alessandro Montanaro | Politecnico di Milano-Italy/CNR |
| ECN 3.0 | 4-Apr-14 | Link | 0:46:30 | Topic 1 Synthesis | Sibendu Som | Argonne |
| ECN 3.0 | 4-Apr-14 | Link | #0 | Intro & Synthesis of Topic 1 | Sibendu Som | Argonne |
| ECN 3.0 | 4-Apr-14 | Link | 0:34:50 | Topic 1.1: Internal Flow Experiment | Chris Powell/David Schmidt | Argonne/UMass-Amherst |
| ECN 3.0 | 4-Apr-14 | Link | #0 | Topic 1.1: Internal Flow Experimental Presentation | Chris Powell/David Schmidt | Argonne/UMass-Amherst |
| ECN 3.0 | 4-Apr-14 | Link | 1:06:00 | Topic 1.1: Internal Flow Modeling | Chris Powell/David Schmidt | Argonne/UMass-Amherst |
| ECN 3.0 | 4-Apr-14 | Link | #0 | Topic 1.1: Internal Flow Modeling Presentation | Chris Powell/David Schmidt | Argonne/UMass-Amherst |
| ECN 3.0 | 4-Apr-14 | Link | 1:34:00 | Topic 1.2: Near Nozzle Experiment | Alan Kastengren/Qingluan Xue/Julien Manin/Chawki Habchi | Argonne/Sandia/IFPEN |
| ECN 3.0 | 4-Apr-14 | Link | #0 | Topic 1.2: Near Nozzle Experimental Presentation | Alan Kastengren/Qingluan Xue/Julien Manin/Chawki Habchi | Argonne/Sandia/IFPEN |
| ECN 3.0 | 4-Apr-14 | Link | 2:04:00 | Topic 1.2: Near Nozzle Modeling | Alan Kastengren/Qingluan Xue/Julien Manin/Chawki Habchi | Argonne/Sandia/IFPEN |
| ECN 3.0 | 4-Apr-14 | Link | #0 | Topic 1.2: Near Nozzle Modeling Presentation | Alan Kastengren/Qingluan Xue/Julien Manin/Chawki Habchi | Argonne/Sandia/IFPEN |
| ECN 3.0 | 4-Apr-14 | Link | 0:00:00 | Topic 1.3: Evaporation and Parametrics | Tommaso Lucchini/Alessandro Montanaro | Politecnico di Milano-Italy/CNR |
| ECN 3.0 | 4-Apr-14 | Link | #0 | Topic 1.3: Evaporation and Parametrics Presentation | Tommaso Lucchini/Alessandro Montanaro | Politecnico di Milano-Italy/CNR |
| ECN 3.0 | 4-Apr-14 | Link | #0 | Diesel Topic 2: Mixing/Chemistry Interactions Introduction | Jose M. Garcia-Oliver | CMT |
| ECN 3.0 | 4-Apr-14 | Link | #0 | Topic 2 synthesis | Jose M. Garcia-Oliver | CMT |
| ECN 3.0 | 4-Apr-14 | Link | 0:57:00 | Topic 2 synthesis | Jose M. Garcia-Oliver | CMT |
| ECN 3.0 | 4-Apr-14 | Link | #0 | Topic 2.1: Combustion Indicators Presentation | Gianluca D'Errico/Olawole Kuti/SY Lee/Michele Bardi | Politecnico di Milano-Italy/KAUST/MTU/ETH-Zurich |
| ECN 3.0 | 4-Apr-14 | Link | 0:06:00 | Topic 2.1: Combustion Indicators Experiment | Gianluca D'Errico/Olawole Kuti/SY Lee/Michele Bardi | Politecnico di Milano-Italy/KAUST/MTU/ETH-Zurich |
| ECN 3.0 | 4-Apr-14 | Link | 0:33:00 | Topic 2.1: Combustion Indicators Modeling | Gianluca D'Errico/Olawole Kuti/SY Lee/Michele Bardi | Politecnico di Milano-Italy/KAUST/MTU/ETH-Zurich |
| ECN 3.0 | 4-Apr-14 | Link | 0:58:00 | Topic 2.2: Flame Structure Experiment | Bart Somers/Hubert Baya-Toda/Evatt Hawkes/Louis-Marie Malbec/Maarten Meijer/Yuri Wright | TU/e/IFPEN/UNSW/ETH-Zurich |
| ECN 3.0 | 4-Apr-14 | Link | #0 | Topic 2.2: Flame Structure Experimental Presentation | Bart Somers/Hubert Baya-Toda/Evatt Hawkes/Louis-Marie Malbec/Maarten Meijer/Yuri Wright | TU/e/IFPEN/UNSW/ETH-Zurich |
| ECN 3.0 | 4-Apr-14 | Link | 1:12:18 | Topic 2.2: Flame Structure Modeling | Bart Somers/Hubert Baya-Toda/Evatt Hawkes/Louis-Marie Malbec/Maarten Meijer/Yuri Wright | TU/e/IFPEN/UNSW/ETH-Zurich |
| ECN 3.0 | 4-Apr-14 | Link | #0 | Topic 2.2: Flame Structure Modeling Presentation | Bart Somers/Hubert Baya-Toda/Evatt Hawkes/Louis-Marie Malbec/Maarten Meijer/Yuri Wright | TU/e/IFPEN/UNSW/ETH-Zurich |
| ECN 3.0 | 4-Apr-14 | Link | 0:00:00 | Topic 2.3: Soot Field Experiment | Scott Skeen/Michele Bolla | Sandia/ETH-Zurich |
| ECN 3.0 | 4-Apr-14 | Link | 0:27:00 | Topic 2.3: Soot Field Modeling | Scott Skeen/Michele Bolla | Sandia/ETH-Zurich |
| ECN 3.0 | 4-Apr-14 | Link | #0 | Topic 2.3: Soot Field Presentation | Scott Skeen/Michele Bolla | Sandia/ETH-Zurich |
| ECN 3.0 | 5-Apr-14 | Link | 0:00:00 | Bridging the gap: How Spray Details Affect Combustion | Yuanjiang Pei/Sibendu Som/Jose M. Garcia-Oliver | Argonne/CMT |
| ECN 3.0 | 5-Apr-14 | Link | #0 | Bridging the gap: How Spray Details Affect Combustion Presentation | Yuanjiang Pei/Sibendu Som/Jose M. Garcia-Oliver | Argonne/CMT |
| ECN 3.0 | 5-Apr-14 | Link | #0 | Topic 3: Spray G Gasoline Direct-Injection Introduction | Scott Parrish | GM |
| ECN 3.0 | 5-Apr-14 | Link | #0 | Topic 3: Spray G Gasoline Direct-Injection Discussion | Scott Parrish | GM |
| ECN 3.0 | 5-Apr-14 | Link | 0:00:00 | Topic 3: Spray G Gasoline Direct-Injection Spray G | Scott Parrish | GM |
| ECN 3.0 | 5-Apr-14 | Link | #0 | 3.1: Injector Geometry Presentation | Yongjin Jung/Peter Hutchins | KAIST/Infineum/ESRF |
| ECN 3.0 | 5-Apr-14 | Link | 0:17:00 | 3.1: Injector Geometry Spray G | Yongjin Jung/Peter Hutchins | KAIST/Infineum/ESRF |
| ECN 3.0 | 5-Apr-14 | Link | 0:26:40 | 3.2: Rate of Injection Spray G | Raul Payri/Scott Parrish | CMT/GM |
| ECN 3.0 | 5-Apr-14 | Link | #0 | 3.2: Rate of Injection Presentation | Raul Payri/Scott Parrish | CMT/GM |
| ECN 3.0 | 5-Apr-14 | Link | 0:42:00 | 3.3: Spray Visualization Spray G | Julien Manin/Gilles Bruneaux/Scott Parrish/Luigi Allocca/Josh Lacey | Sandia/IFPEN/GM/IM/Melbourne |
| ECN 3.0 | 5-Apr-14 | Link | #0 | 3.3: Spray Visualization Presentation | Julien Manin/Gilles Bruneaux/Scott Parrish/Luigi Allocca/Josh Lacey | Sandia/IFPEN/GM/IM/Melbourne |
| ECN 3.0 | 5-Apr-14 | Link | 1:21:00 | 3.4: Drop Size Measurements Spray G | Scott Parrish | GM |
| ECN 3.0 | 5-Apr-14 | Link | #0 | 3.4: Drop Size Measurements Presentation | Scott Parrish | GM |
| ECN 3.0 | 5-Apr-14 | Link | 1:34:30 | 3.5: Internal Flow Modeling Spray G | Ron Grover | GM |
| ECN 3.0 | 5-Apr-14 | Link | #0 | 3.5: Internal Flow Modeling Presentation | Ron Grover | GM |
| ECN 3.0 | 5-Apr-14 | Link | 1:52:10 | 3.6: Spray Modeling Spray G | Noah Van Dam/Tommasso Lucchini/Sibendu Som | UW/Politecnico di Milano-Italy/Argonne |
| ECN 3.0 | 5-Apr-14 | Link | #0 | 3.6: Spray Modeling Presentation | Noah Van Dam/Tommasso Lucchini/Sibendu Som | UW/Politecnico di Milano-Italy/Argonne |
| ECN 3.0 | 5-Apr-14 | Link | #0 | Topic 4: Engine Flows and Combustion Introduction | David Reuss | UM |
| ECN 3.0 | 5-Apr-14 | Link | #0 | Topic 4: Engine Flows and Combustion Discussion | David Reuss | UM |
| ECN 3.0 | 5-Apr-14 | Link | 0:41:00 | Topic 4: Engine Flows and Combustion Engines | David Reuss | UM |
| ECN 3.0 | 5-Apr-14 | Link | 0:45:45 | Topic 4.1: Measurements Engines | Brian Peterson | TU Darmstadt |
| ECN 3.0 | 5-Apr-14 | Link | #0 | Topic 4.1: Measurements Presentation | Brian Peterson | TU Darmstadt |
| ECN 3.0 | 5-Apr-14 | Link | 1:21:30 | Topic 4.2: Simulations (LES, RANS) Engines | Cecile Pera | IFPEN |
| ECN 3.0 | 5-Apr-14 | Link | #0 | Topic 4.2: Simulations (LES, RANS) Presentation | Cecile Pera | IFPEN |
| ECN 3.0 | 5-Apr-14 | Link | 0:00:00 | Topic 4.3: Benchmarking: Comparisons, Analysis, and Validation Engines | David Reuss | UM |
| ECN 3.0 | 5-Apr-14 | Link | #0 | Topic 4.3: Benchmarking: Comparisons, Analysis, and Validation Presentation | David Reuss | UM |
| ECN 3.0 | 5-Apr-14 | Link | 0:25:30 | Topic 4.4: SI Engine Simulation Engines | Cecile Pera | IFPEN |
| ECN 3.0 | 5-Apr-14 | Link | #0 | Topic 4.4: SI Engine Simulation Presentation | Cecile Pera | IFPEN |
| ECN 3.1 | 3-Jul-14 | Link | 0:00:00 | Transcritical Mixing Layers in ECN Spray A and Realistic Diesel Conditions | Zachary Falgout | IFPEN |
| ECN 3.1 | 3-Jul-14 | Link | 0:09:27 | 2D Soot absorption experiments | Nicholas Dronniou | IFPEN |
| ECN 3.1 | 3-Jul-14 | Link | 0:34:25 | Spray B in engines | Louie-Marie Malbec | Sandia |
| ECN 3.1 | 3-Jul-14 | Link | 0:59:28 | Spray B experiment Penetration, vaporization, ignition and lift-off stablization | Yongjin Jung | KAIST |
| ECN 3.1 | 3-Jul-14 | Link | 1:23:30 | Single cylinder optical engine bench | Ezio Mancaruso | CNR |
| ECN 3.1 | 3-Jul-14 | Link | 1:35:02 | Introducing new injectors Spray C & D | Lyle Pickett | Sandia |
| ECN 3.1 | 3-Jul-14 | Link | 1:41:30 | Requirements for using injectors | Lyle Pickett | Sandia |
| ECN 3.2 | 4-Sep-14 | Link | 0:00:15 | Spray C & Spray D Internal Geometry | Lyle M. Pickett | Sandia |
| ECN 3.2 | 4-Sep-14 | Link | 0:15:25 | Immediate plans | Lyle M. Pickett | Sandia |
| ECN 3.2 | 4-Sep-14 | Link | 0:18:05 | Multiple injection case ECN4 | Lyle M. Pickett | Sandia |
| ECN 3.2 | 4-Sep-14 | Link | 0:37:49 | Measuring transient entrainment rates of a confined vaporizing diesel jet | W. Ethan Eagle | Sandia |
| ECN 3.2 | 4-Sep-14 | Link | 0:55:54 | Comparing entrainment in reacting and non-reacting cases | Louie-Marie Malbec | IFPEN |
| ECN 3.2 | 4-Sep-14 | Link | 1:08:42 | Topic 5: Combustion | Jose M Garcia-Oliver | CMT |
| ECN 3.2 | 4-Sep-14 | Link | 1:15:48 | Guidance on Experiments and Simulations to be Preformed | Sibendu Som | Argonne |
| ECN 3.2 | 4-Sep-14 | Link | 1:23:01 | Reactions that lead to ignition | Evatt Hawkes | UNSW |
| ECN 3.2 | 4-Sep-14 | Link | 1:29:17 | Topic 6 Guidelines | Lyle M. Pickett | Sandia |
| ECN 3.2 | 4-Sep-14 | Link | 1:35:15 | Topic 7 : Spray B in engines | Louie-Marie Malbec | IFPEN |
| ECN 3.2 | 4-Sep-14 | Link | 1:46:19 | Topic 8: Spray G Nozzle Geometry and Internal Nozzle Flow | Chris Powell | Argonne |
| ECN 3.2 | 4-Sep-14 | Link | 1:52:54 | Topic 9: Evaporative Spray G | Raul Payri & Daniel Vaquerizo | CMT |
| ECN 3.2 | 4-Sep-14 | Link | 1:58:09 | Topic 10: Spray G in Engines | Wei Zeng & Brian Peterson | Sandia |
| ECN 3.3 | 2-Oct-14 | Link | 0:00:18 | Meeting start | Lyle M. Pickett | Sandia |
| ECN 3.3 | 2-Oct-14 | Link | 0:03:41 | TU/e Updates | Noud Maaes | TU/e |
| ECN 3.3 | 2-Oct-14 | Link | 0:20:29 | Influence of combustion models on the flame structure based on Spray A from Sandia | Bart Somers | TU/e |
| ECN 3.3 | 2-Oct-14 | Link | 0:41:27 | Topic 5: Reacting jet penetration and volumetic expansion | Jose M Garcia-Oliver | CMT |
| ECN 3.3 | 2-Oct-14 | Link | 1:07:40 | Internal and near-nozzle Flow in multi-hole gasoline injector under flashing and non-flashing conditions | Maryam Moulai | UMA |
| ECN 3.3 | 2-Oct-14 | Link | 1:18:50 | Spray A: internal and external flow | Marco Arienti | Sandia |
| ECN 3.3 | 2-Oct-14 | Link | 1:35:37 | Comparison of Spray G xray tomography and optical microscopy | Lyle M. Pickett | Sandia |
| ECN 3.4 | 6-Nov-14 | Link | 0:01:17 | A novel approach to assess spray models using joint visible and xray extinction measurements | Gina Magnotti | GA Tech |
| ECN 3.4 | 6-Nov-14 | Link | 0:16:24 | Liquid and vapor jet penetration with a variable spreading angle | Yongjin Jung | KAIST |
| ECN 3.4 | 6-Nov-14 | Link | 0:35:46 | A novel approach to assess spray models using joint visible and xray extinction measurements | Gina Magnotti | GA Tech |
| ECN 3.4 | 6-Nov-14 | Link | 0:49:42 | Testing of avaliable chemical mechanisms for dodecane | Alessio Frassoldati | Politecnico di Milano-Italy |
| ECN 3.4 | 6-Nov-14 | Link | 1:06:30 | Closed homogeneous reactor evaluation of n-dodecane mechanisms | Scott Skeen | Sandia |
| ECN 3.4 | 6-Nov-14 | Link | 1:17:13 | Combustion recession after end of injection in Diesel Sprays | Benjamin Knox | GA Tech |
| ECN 3.5 | 4-Dec-14 | Link | 0:00:00 | Spray G internal geometry | Julien Manin | Sandia |
| ECN 3.5 | 4-Dec-14 | Link | 0:16:44 | Topic 7: Spray B in engines vapor penetration: LIF vs Schlieren | Louis-Marie Malbec | Sandia |
| ECN 3.5 | 4-Dec-14 | Link | 0:32:13 | Visualization of ignition processes in high-pressure sprays with multiple injections of n-dodecane | Scott Skeen | Sandia |
| ECN 3.5 | 4-Dec-14 | Link | 1:16:55 | Spray C and Spray D injector distribution and short term work | Raul Payri | CMT |
| ECN 3.5 | 4-Dec-14 | Link | 1:22:33 | Current and planned injector locations | Scott Parrish | GM |
| ECN 3.5 | 4-Dec-14 | Link | 2:06:25 | ECN nozzle ball assembly | Lyle M. Pickett | Sandia |
| ECN 3.6 | 5-Feb-15 | Link | 0:00:00 | Introduction | Lyle Pickett | Sandia |
| ECN 3.6 | 5-Feb-15 | Link | 0:05:04 | Transition to "miscible mixing" near Spray A operating conditions | Cyril Crua | Brighton |
| ECN 3.6 | 5-Feb-15 | Link | 0:36:13 | Spray C&D hydraulic measurements | Raul Payri | CMT |
| ECN 3.6 | 5-Feb-15 | Link | 0:56:40 | Nozzle flow characterization of ECN Injectors | Ben Knox | GA Tech |
| ECN 3.6 | 5-Feb-15 | Link | 1:11:02 | Spray G liquid/vapor characterisation | Joshua Lacey | Melbourne |
| ECN 3.6 | 5-Feb-15 | Link | 1:35:35 | Investigation of the mixing process and the fuel mass concentration fields for Spray G | Lama Itani | IFPEN |
| ECN 3.6 | 5-Feb-15 | Link | 2:01:05 | ECN Spray G Nozzle Meshing in GridPro | Samuel James | Grid Pro |
| ECN 3.6 | 5-Feb-15 | Link | 2:52:49 | Concluding statements | Lyle Pickett | Sandia |
| ECN 3.7 | 5-Mar-15 | Link | 0:00:00 | Near Nozzle Flow Updates | Sibendu Som | Argonne |
| ECN 3.7 | 5-Mar-15 | Link | 0:10:54 | Evaporative Diesel Spray | Caroline Genzale | Georgia Tech |
| ECN 3.7 | 5-Mar-15 | Link | 0:21:20 | Combustion | Jose M Garcia-Oliver | CMT-UPVLC |
| ECN 3.7 | 5-Mar-15 | Link | 0:32:43 | Topic 4 Combustion, LOL Flame Structure | Raul Payri | CMT |
| ECN 3.7 | 5-Mar-15 | Link | 0:34:20 | Topic 4 Continued | Scott Skeen | Sandia |
| ECN 3.7 | 5-Mar-15 | Link | 0:45:53 | Topic 7: Spray B in engines | Louis-Marie Malbec | IFPEN/Sandia |
| ECN 3.7 | 5-Mar-15 | Link | 0:57:34 | Topic 8: Spray G Nozzle geometry and Internal Nozzle flow | Chris Powell | Argonne |
| ECN 3.7 | 5-Mar-15 | Link | 1:08:16 | Topic 9: Evaporative Spray G | Daniel Vaquerizo Sanchez | UPV |
| ECN 3.7 | 5-Mar-15 | Link | 1:17:49 | Topic 10: Spray G in engines | Brian Peterson | TU Darmstadt |
| ECN 3.7 | 5-Mar-15 | Link | 1:27:00 | Discussion & Announcements | N/A | N/A |
| ECN 3.9 | 7-May-15 | Link | 0:00:00 | General Information | Lyle Pickett | Sandia |
| ECN 3.9 | 7-May-15 | Link | 0:04:07 | Spray C & D measurements | Raul Payri | CMT |
| ECN 3.9 | 7-May-15 | Link | 0:19:11 | Sub-grid Scale Momentum coupling applied to Spray A | Federico Perini | University of Wisconsin |
| ECN 3.9 | 7-May-15 | Link | 0:34:34 | Internal Nozzle Flow Simulations: Spray B vs Spray A | Qinglaun Xue | Argonne |
| ECN 3.9 | 7-May-15 | Link | 0:44:59 | Extinction imaging of Spray C and Spray D | Fredrik Westlye | DTU |
| ECN 3.9 | 7-May-15 | Link | 0:55:37 | Large Eddy Simulation of a Reacting Spray Flame with Multiple Realizations under Compression Ignition Engine Conditions | Yuanjiang Pei | Argonne |
| ECN 3.9 | 7-May-15 | Link | 1:13:38 | Rate of momentum. Evaporative & Internal Flow for Spray G | Daniel Vaquerizo Sanchez | UPV |
| ECN 3.9 | 7-May-15 | Link | 1:24:23 | Spray G Liquid and Vapor characterization at different Ambient Conditions | Alessandro Montanaro | Istituto Motori |
| ECN 3.9 | 7-May-15 | Link | 1:35:52 | Temperature and mixing measurments of Spray G | Lama Itani | IFPEN |
| ECN 3.9 | 7-May-15 | Link | 1:51:57 | X-ray Measurements of ECN Spray G | Daniel Duke | Argonne |
| ECN 3.9 | 7-May-15 | Link | 2:03:26 | Concluding Statements | Lyle Pickett | Sandia |
| ECN 3.10 | 4-Jun-15 | Link | 0:00:00 | Presentation of the agenda and webex connection | Raul Payri | CMT |
| ECN 3.10 | 4-Jun-15 | Link | 0:00:56 | Topic 3: Spray B Results of evaporative experiments | Alberto Viera Sotillo | UPV |
| ECN 3.10 | 4-Jun-15 | Link | 0:18:07 | Topic 5: Combustion | Jose M Garcia-Oliver | CMT-UPVLC |
| ECN 3.10 | 4-Jun-15 | Link | 0:24:52 | Topic 5 & 6: Predictive Simulations of Spray Combustion & Emissions | Chitral Naik | ANSYS |
| ECN 3.10 | 4-Jun-15 | Link | 0:52:35 | Topic 7: Spray B in engines | Louis-Marie Malbec | IFPEN/Sandia |
| ECN 3.10 | 4-Jun-15 | Link | 1:02:37 | Topic 8: Flash Boiling | Kaushik Saha | Argonne |
| ECN 3.10 | 4-Jun-15 | Link | 1:22:20 | Concluding Statements & Reminders | N/A | N/A |
| ECN 3.11 | 30-Jun-15 | Link | 0:00:00 | Agenda | Gilles Bruneaux | IFPEN |
| ECN 3.11 | 30-Jun-15 | Link | 0:07:42 | Topic 2: Primary atomization (near-nozzle flow) | Cyril Crua | University of Brighton |
| ECN 3.11 | 30-Jun-15 | Link | 0:27:39 | Topic 1: Internal Nozzle Flow for Cavitating Spray C | Saeed Jahangirian | ANSYS |
| ECN 3.11 | 30-Jun-15 | Link | 0:46:10 | Topic 2: Spray A primary atomization Modelling under sub-critical conditions using an Eulerian-Eulerian Two-Fluid Model coupled to a Lagrangian-Eulerian approach | Chaouki Habchi | IFPEN |
| ECN 3.11 | 30-Jun-15 | Link | 1:03:28 | Topic 1: Modeling of spray C/D internal and near nozzle flow | Michele Battistoni | University of Perugia |
| ECN 3.11 | 30-Jun-15 | Link | 1:15:50 | Topic 3: Evaporative diesel spray (aka ECN France project) | Michele Bardi & Gilles Bruneaux | IFPEN |
| ECN 3.11 | 30-Jun-15 | Link | 1:30:01 | Topic 8: VOF-LES injector internal flow and spray primary breakup study | Bizhan Befrui | DELPHI |
| ECN 3.11 | 30-Jun-15 | Link | 1:50:07 | Concluding statements | Gilles Bruneaux | IFPEN |
| ECN 4.0 | 5-Sep-15 | Link | 0:00:00 | ECN4 Intro | Lyle Pickett/Gilles Bruneaux/Raul Payri | Sandia/IFPEN/CMT |
| ECN 4.0 | 5-Sep-15 | Link | #0 | Introduction presentation | Lyle Pickett/Gilles Bruneaux/Raul Payri | Sandia/IFPEN/CMT |
| ECN 4.0 | 5-Sep-15 | Link | 0:00:00 | Spray G Gasoline Direct-Injection Intro | Scott Parrish | GM |
| ECN 4.0 | 5-Sep-15 | Link | #0 | Spray G Gasoline Direct-Injection Intro Presentation | Scott Parrish | GM |
| ECN 4.0 | 5-Sep-15 | Link | 0:00:00 | Spray G Gasoline Direct-Injection Experiment | Chris Powell/Daniel Duke/Ron Grover | Argonne/GM |
| ECN 4.0 | 5-Sep-15 | Link | #0 | Spray G Gasoline Direct-Injection Nozzle Geometry and near-nozzle experiments Presentation | Chris Powell/Daniel Duke/Ron Grover | Argonne/GM |
| ECN 4.0 | 5-Sep-15 | Link | 0:00:00 | Spray G Gasoline Direct-Injection Modeling | Ron Grover | GM |
| ECN 4.0 | 5-Sep-15 | Link | #0 | Spray G Gasoline Direct-Injection Modeling Presentation | Ron Grover | GM |
| ECN 4.0 | 5-Sep-15 | Link | 0:00:00 | Spray G Gasoline Direct-Injection Lacey | Joshua Lacey/Daniel Vaquerizo Sanchez | Melbourne/CMT |
| ECN 4.0 | 5-Sep-15 | Link | #0 | Spray G Gasoline Direct-Injection Lacey Presentation | Joshua Lacey/Daniel Vaquerizo Sanchez | Melbourne/CMT |
| ECN 4.0 | 5-Sep-15 | Link | 0:00:00 | Spray G Gasoline Direct-Injection Mixing | Lama Itani/Lyle Pickett | IFPEN/Sandia |
| ECN 4.0 | 5-Sep-15 | Link | #0 | Spray G Gasoline Direct-Injection Mixing Presentation | Lama Itani/Lyle Pickett | IFPEN/Sandia |
| ECN 4.0 | 5-Sep-15 | Link | 0:00:00 | Spray G Gasoline Direct-Injection Summary | N/A | N/A |
| ECN 4.0 | 5-Sep-15 | Link | #0 | Spray G Gasoline Direct-Injection Summary Presentation | N/A | N/A |
| ECN 4.0 | 5-Sep-15 | Link | 0:00:00 | Non-Reactive Diesel Spray Arienti | Marco Arienti | Sandia |
| ECN 4.0 | 5-Sep-15 | Link | #0 | Non-Reactive Diesel Spray Internal nozzle flow Presentation | Marco Arienti | Sandia |
| ECN 4.0 | 5-Sep-15 | Link | 0:00:00 | Non-Reactive Diesel Spray Crua | Cyril Crua | Brighton |
| ECN 4.0 | 5-Sep-15 | Link | #0 | Non-Reactive Diesel Spray Droplet and liquid size measurements Presentation | Cyril Crua | Brighton |
| ECN 4.0 | 5-Sep-15 | Link | 0:00:00 | Non-Reactive Diesel Spray Som | Sibendu Som | Argonne |
| ECN 4.0 | 5-Sep-15 | Link | #0 | Non-Reactive Diesel Spray Near-nozzle mixing Presentation | Sibendu Som | Argonne |
| ECN 4.0 | 5-Sep-15 | Link | 0:00:00 | Non-Reactive Diesel Spray Genzale | Caroline Genzale | Georgia Tech |
| ECN 4.0 | 5-Sep-15 | Link | #0 | Non-Reactive Diesel Spray Vaporizing diesel spray: A and B Presentation | Caroline Genzale | Georgia Tech |
| ECN 4.0 | 5-Sep-15 | Link | 0:00:00 | Non-Reactive Diesel Spray Westlye | Fredrick Westlye | Tech. U. Denmark |
| ECN 4.0 | 5-Sep-15 | Link | #0 | Non-Reactive Diesel Spray Experimental methodology for liquid penetration measurements: C and D Presentation | Fredrick Westlye | Tech. U. Denmark |
| ECN 4.0 | 6-Sep-15 | Link | 0:00:00 | Diesel Combustion GarciaOliver | Jose Garcia-Oliver | CMT |
| ECN 4.0 | 6-Sep-15 | Link | #0 | Diesel Combustion Reactive flow Presentation | Jose Garcia-Oliver | CMT |
| ECN 4.0 | 6-Sep-15 | Link | 0:00:00 | Diesel Combustion Hawkes | Evatt Hawkes | UNSW |
| ECN 4.0 | 6-Sep-15 | Link | #0 | Diesel Combustion Ignition Presentation | Evatt Hawkes | UNSW |
| ECN 4.0 | 6-Sep-15 | Link | 0:00:00 | Diesel Combustion Somers | Bart Somers | TU/e |
| ECN 4.0 | 6-Sep-15 | Link | #0 | Diesel Combustion Flame Development Presentation | Bart Somers | TU/e |
| ECN 4.0 | 6-Sep-15 | Link | 0:00:00 | Diesel Combustion Skeen | Scott Skeen | Sandia |
| ECN 4.0 | 6-Sep-15 | Link | #0 | Diesel Combustion Soot & Multiple Injections Presentation | Scott Skeen | Sandia |
| ECN 4.0 | 6-Sep-15 | Link | 0:00:00 | Diesel Combustion Malbec | Louis-Marie Malbec | IFPEN |
| ECN 4.0 | 6-Sep-15 | Link | #0 | Diesel Combustion Spray B: test rigs vs. engines Presentation | Louis-Marie Malbec | IFPEN |
| ECN 4.0 | 6-Sep-15 | Link | 0:00:00 | Diesel Combustion Spray C Combust | Jose Garcia-Oliver | CMT |
| ECN 4.0 | 6-Sep-15 | Link | #0 | Diesel Combustion Spray C and Spray D Presentation | Jose Garcia-Oliver | CMT |
| ECN 4.1 | 5-Nov-15 | Link | 0:00:00 | Neutron Imaging of Gasoline Fuel Injectors | Todd Toops | ORNL |
| ECN 4.1 | 5-Nov-15 | Link | 0:13:07 | Spray G preliminary PIV results on inter-plume aerodynamics and plume collapse | Panos Sphicas | Sandia |
| ECN 4.1 | 5-Nov-15 | Link | 0:24:03 | Engine Spray B Sensitivity Analysis with a Propagation Approach to Uncertainty Quantification for ECN | Ethan Eagle | CRF |
| ECN 4.1 | 5-Nov-15 | Link | 0:38:58 | Spray B in Diesel Engines: Extensive Spray Combustion Simulations at Well Controlled Boundary Conditions | Raul Payri | Lib-ICE, ICE Group, Politecnico |
| ECN 4.2 | 3-Dec-15 | Link | 0:00:00 | X-ray Needle Lift and Tomography Measurements of ECN Spray G | Daniel Duke | Argonne |
| ECN 4.2 | 3-Dec-15 | Link | 0:21:41 | Characterization of a set of 10 new ECN Spray A injectors | Gilles Bruneaux | IFPEN |
| ECN 4.3 | 4-Feb-16 | Link | 0:00:00 | Introduction | Lyle Pickett | Sandia |
| ECN 4.3 | 4-Feb-16 | Link | 0:05:05 | Large Eddy Simulation of n-dodecane spray flames using Flamelet Generated Manifolds | Armin Wehrfritz | Aalto |
| ECN 4.3 | 4-Feb-16 | Link | 0:20:13 | Computing Statistical Averages from LES of Spray Flames | Muhsin Ameen | Argonne |
| ECN 4.3 | 4-Feb-16 | Link | 0:37:22 | Eulerian Compressible LES of Spray A | Ed Knudsen | BOSCH |
| ECN 4.3 | 4-Feb-16 | Link | 0:53:20 | Radiative heat transfer in Spray A simulation | Zongyu Yue | Wisconsin |
| ECN 4.3 | 4-Feb-16 | Link | 1:12:21 | Soot Experiments and Modeling | Scott Skeen | Sandia |
| ECN 4.3 | 4-Feb-16 | Link | 1:14:40 | Development of a Novel Tabulated Flamelet Model for Non-Premixed Flames | Prithwish Kundu | Argonne |
| ECN 4.3 | 4-Feb-16 | Link | 1:34:09 | The effect of radiation heat transfer under ECN Spray A conditions using TPDF | Michele Bolla | UNSW |
| ECN 4.3 | 4-Feb-16 | Link | 1:46:56 | Soot Experiments and Modeling | Scott Skeen | Sandia |
| ECN 4.4 | 3-Mar-16 | Link | 0:00:00 | Presentation of the agenda and checking webex connection | Raul Payri | CMT |
| ECN 4.4 | 3-Mar-16 | Link | 0:03:02 | Presentation of new experimental hardware (high pressure vessel) for ECN activities | Christine RousselleOrleans | PRISME |
| ECN 4.4 | 3-Mar-16 | Link | 0:15:30 | Spray A & B: Spray axis angle fluctuations | Alberto Viera | CMT |
| ECN 4.4 | 3-Mar-16 | Link | 0:36:51 | Tomography results for Spray G | Katarzyna E. Matusik | Argonne |
| ECN 4.4 | 3-Mar-16 | Link | 0:59:15 | Inter-plume aerodynamics for Spray G collapse | Panos Sphicas | Sandia |
| ECN 4.4 | 3-Mar-16 | Link | 1:17:55 | Simulations results for Spray G flashing and non-flashing injection including transient needle motion | Eli Baldwin | Massachusetts-Amaherst |
| ECN 4.5 | 7-Apr-16 | Link | 0:00:00 | Presentation of the agenda and webex connection check | Gilles Bruneaux | IFPEN |
| ECN 4.5 | 7-Apr-16 | Link | 0:01:49 | Penetration and combustion characterization: C and D | Fredrik Ree Westlye | DTU |
| ECN 4.5 | 7-Apr-16 | Link | 0:25:18 | Latest updates on the analysis of the flame structure | Noud Maes | TU/e |
| ECN 4.5 | 7-Apr-16 | Link | 0:46:14 | Latest updates on the analysis of the interaction between local flow and flame structure | Jose Maria Garcia Oliver | CMT |
| ECN 4.6 | 5-May-16 | Link | 0:00:00 | Understanding the transition to dense-jet dynamics near Spray A operating conditions | Rainer N. Dahms | Sandia |
| ECN 4.6 | 5-May-16 | Link | 0:19:30 | Ignition and Lift-off Mechanisms in n-Dodecane Split Injection Spray-Flames | Ahmed Abdul Moiz | Argonne |
| ECN 4.6 | 5-May-16 | Link | 0:37:31 | Scaling Combustion Recession After End-of-Injection in Diesel Sprays | Benjamin Knox | Georgia Institute of Technology |
| ECN 4.6 | 5-May-16 | Link | 0:55:30 | Application of an unsteady flamelet model in a RANS framework for Spray A simulation | Eduardo J. Perez-Sanchez | CMT |
| ECN 4.6 | 5-May-16 | Link | 1:11:38 | Characterization of Diesel Spray Models Using Visible and X-Ray Extinction Measurements | Gina M. Magnotti | Georgia Institute of Technology |
| ECN 4.6 | 5-May-16 | Link | 1:37:20 | The role of chemistry in predicting pressure-bassed ignition delay in constant volume combustion chamber | Omid Samimi Abianeh | Georgia Southern University |
| ECN 4.7 | 2-Jun-16 | Link | 0:00:00 | ECN4.7 mechanics and update on ECN5 calendar | Lyle Pickett | Sandia |
| ECN 4.7 | 2-Jun-16 | Link | 0:07:06 | On the elusive scaling of Spray C and Spray D wireframe geometry | Lyle Pickett | Sandia |
| ECN 4.7 | 2-Jun-16 | Link | 0:18:35 | Improved geometry accuracy of Spray C and Spray D using high-resolution x-ray CT | Daniel Duke, Katie Matusik | Argonne |
| ECN 4.7 | 2-Jun-16 | Link | 0:42:48 | Evaporative diesel spray guidelines for ECN5 (topic 3) | Michele Bardi | IFPEN |
| ECN 4.7 | 2-Jun-16 | Link | 0:56:48 | Diesel combustion guidelines for ECN5 (topic 5) | Jose M. Garcia-Oliver | CMT |
| ECN 4.7 | 2-Jun-16 | Link | 1:10:11 | Diesel emission (soot) guidelines for ECN5 (topic 6) | Scott Skeen | Sandia |
| ECN 4.8 | 7-Jul-16 | Link | 0:00:00 | Introduction | Raul Payri | CMT |
| ECN 4.8 | 7-Jul-16 | Link | 0:03:49 | Effects of Chemical Mechanism Choice on Predictions of Combustion Recession for Spray A in OpenFOAM | Dorrin Jarrahbashi | Georgia Institute of Technology |
| ECN 4.8 | 7-Jul-16 | Link | 0:22:22 | An experimental and numerical comparison of chemical mechanisms for n-dodecane under ECN conditions | Dario Lopez | CMT |
| ECN 4.8 | 7-Jul-16 | Link | 0:42:29 | Topic 7 - Spray B | Louis-Marie Malbec | IFPEN |
| ECN 4.8 | 7-Jul-16 | Link | 0:58:14 | Topic 1 - Proposals for ECN 5 | Marco Arienti | Sandia |
| ECN 4.8 | 7-Jul-16 | Link | 1:12:34 | Topic 2 - Primary atomization (near-nozzle flow) | Michele Battistoni | University of Perugia |
| ECN 4.9 | 1-Sep-16 | Link | 0:00:00 | ECN4.9 mechanics and update on ECN5 calendar | Lyle Pickett | Sandia |
| ECN 4.9 | 1-Sep-16 | Link | 0:01:23 | Application of Tabulated Flamelet Combustion Models to Low Temperature Conditions | Prithwish Kundu | Argonne |
| ECN 4.9 | 1-Sep-16 | Link | 0:24:49 | Spray G External Spray visualization and Spray Collapse description through penetration and morphology analysis | Daniel Vaquerizo | CMT |
| ECN 4.9 | 1-Sep-16 | Link | 0:46:15 | ECN 4.9 Spray G collapse at elevated temperature with longer injection duration | Panos Sphicas | Imperial College |
| ECN 4.9 | 1-Sep-16 | Link | 1:02:19 | ECN 4.9 Topic 7 - Spray B Preparations for Spray B engine experiments | Ming Zhao | University of Duisburg-Essen |
| ECN 4.9 | 1-Sep-16 | Link | 1:16:01 | Time-Resolved Planar Laser Rayleigh Scattering in Evaporative Diesel Sprays | Julien Manin | Sandia |
| ECN 4.11 | 3-Nov-16 | Link | #1 | ECN4.11 mechanics and update on ECN5 calendar/registration | Gilles Bruneaux | IFPEN |
| ECN 4.11 | 3-Nov-16 | Link | #3 | Educated injection rate for Spray C/D | Raul Payri | CMT |
| ECN 4.11 | 3-Nov-16 | Link | #19 | Multi-component vapor-liquid equilibrium model and application to ECN Spray A | Jan Matheis | TUM |
| ECN 4.11 | 3-Nov-16 | Link | #37 | Lift-off and soot characterization of Spray C and D | Noud Maes | IFPEN / TUE |
| ECN 4.11 | 3-Nov-16 | Link | #54 | Study of ECN-spray A under inert and reacting conditions in a Rapid Compression Machine | Ben-Houidi, Sotton, Strozzi, and Bellenoue | PPRIME Institute |
| ECN 4.11 | 3-Nov-16 | Link | #68 | On- and Off-Resonant CH2O Imaging and Transient Flame Development in Multiple Injections | Noud Maes | TU/e |
| ECN 4.11 | 3-Nov-16 | Link | #88 | Soot and spectral radiation modeling for Spray A | Dan Haworth | PSU |
| ECN 4.12 | 1-Dec-16 | Link | 0:00:00 | ECN4.12 mechanics and update on ECN5 calendar | Lyle Pickett | Sandia |
| ECN 4.12 | 1-Dec-16 | Link | 0:04:44 | ECN4.12 - Spray and Nozzle Tomography of 8 Nominally Duplicate Spray G Injectors | Katie Matusik | Argonne |
| ECN 4.12 | 1-Dec-16 | Link | 0:13:40 | Numerical modelling of spray and combustion processes using the Euler Eulerian multiphase approach | Zvonimir Petranovic | University of Zagreb |
| ECN 4.12 | 1-Dec-16 | Link | 0:27:07 | Standardization of Inversion Transformations | Noud Maes | TU/e |
| ECN 4.12 | 1-Dec-16 | Link | 0:43:21 | Preparations for Spray G Experiments at University of Illinois | Wayne Chang | University of Illinois at Urbana-Champaign |
| ECN 4.12 | 1-Dec-16 | Link | 0:51:45 | Understanding the ignition mechanism for Spray A | Rainer Dahms | Sandia |
| ECN 4.13 | 2-Feb-17 | Link | 0:00:00 | Presentation of the agenda | Raul Payri | CMT |
| ECN 4.13 | 2-Feb-17 | Link | 0:05:00 | Neutron Imaging of Intra-nozzle Fluid Dynamics in Fuel Injectors | Todd Toops | ORNL |
| ECN 4.13 | 2-Feb-17 | Link | 0:18:42 | Study of ECN-spray A under inert and reacting conditions in a Rapid Compression Machine - Analysis of discrepancies | Moez Ben-Houidi | PPRIME Institute |
| ECN 4.13 | 2-Feb-17 | Link | 0:43:45 | Topic 1/2/3 - topics' agenda | Michele Battistoni | University of Perugia |
| ECN 4.13 | 2-Feb-17 | Link | 0:51:35 | Topic 3 | Michele Bardi | IFPEN |
| ECN 4.13 | 2-Feb-17 | Link | 1:01:40 | ECN5 logistics, preliminary agenda, and different topics that will be covered in Detroit each day including social activities | Raul Payri | CMT |
| ECN 4.14 | 2-Mar-17 | Link | 0:00:00 | ECN4.14 mechanics and update on ECN5 calendar | Lyle Pickett | Sandia |
| ECN 4.14 | 2-Mar-17 | Link | 0:04:11 | ECN5: Topic 6 SOOT | Scott Skeen | Sandia |
| ECN 4.14 | 2-Mar-17 | Link | 0:12:47 | Soot formation with and without water vapor in the charge gas | Sushant Pandurangi | ETH zurich |
| ECN 4.14 | 2-Mar-17 | Link | 0:27:11 | Diesel Spray Penetration into a Non-quiescent Environment | Tiemin Xuan | CMT |
| ECN 5.0 | 31-Mar-17 | Link | #0 | Overall Summary | N/A | N/A |
| ECN 5.0 | 31-Mar-17 | Link | 0:00:00 | ECN5 Intro | Lyle Pickett/Gilles Bruneaux/Raul Payri | Sandia/IFPEN/CMT |
| ECN 5.0 | 31-Mar-17 | Link | #0 | Introduction Presentation | Lyle Pickett/Gilles Bruneaux/Raul Payri | Sandia/IFPEN/CMT |
| ECN 5.0 | 31-Mar-17 | Link | 0:11:30 | Non-Reactive Diesel Spray Arienti | Marco Arienti | Sandia |
| ECN 5.0 | 31-Mar-17 | Link | #0 | Non-Reactive Diesel Spray Internal nozzle flow Presentation | Marco Arienti | Sandia |
| ECN 5.0 | 31-Mar-17 | Link | 0:40:50 | Non-Reactive Diesel Spray Battistoni | Michele Battistoni | University of Perugia |
| ECN 5.0 | 31-Mar-17 | Link | #0 | Non-Reactive Diesel Spray Near-nozzle mixing Presentation | Michele Battistoni | University of Perugia |
| ECN 5.0 | 31-Mar-17 | Link | 0:24:20 | Non-Reactive Diesel Spray Bardi | Michele Bardi | IFPEN |
| ECN 5.0 | 31-Mar-17 | Link | #0 | Non-Reactive Diesel Spray Spray mixing and evaporation Presentation | Michele Bardi | IFPEN |
| ECN 5.0 | 31-Mar-17 | Link | 0:00:30 | Non-Reactive Diesel Spray Manin | Julien Manin | Sandia/Artium |
| ECN 5.0 | 31-Mar-17 | Link | #0 | Non-Reactive Diesel Spray High-speed mixing measurements Presentation | Julien Manin | Sandia/Artium |
| ECN 5.0 | 31-Mar-17 | Link | 0:00:00 | Diesel Combustion GarciaOliver | Jose Garcia-Oliver | CMT |
| ECN 5.0 | 31-Mar-17 | Link | #0 | Diesel Combustion Combustion Introduction Presentation | Jose Garcia-Oliver | CMT |
| ECN 5.0 | 31-Mar-17 | Link | 0:52:00 | Diesel Combustion Hawkes | Evatt Hawkes | UNSW |
| ECN 5.0 | 31-Mar-17 | Link | #0 | Diesel Combustion SprayCD Experiment Presentation | Evatt Hawkes | UNSW |
| ECN 5.0 | 31-Mar-17 | Link | 1:30:30 | Diesel Combustion Somers | Bart Somers | TU/e |
| ECN 5.0 | 31-Mar-17 | Link | #0 | Diesel Combustion Topic #4 Hawkes Chemistry Presentation | Bart Somers | TU/e |
| ECN 5.0 | 31-Mar-17 | Link | 0:00:00 | Diesel Combustion Maes | Noud Maes | TU/e |
| ECN 5.0 | 31-Mar-17 | Link | #0 | Diesel Combustion Topic #5 Somers Flame Structure Presentation | Noud Maes | TU/e |
| ECN 5.0 | 31-Mar-17 | Link | 0:10:00 | Diesel Combustion Skeen | Scott Skeen | Sandia |
| ECN 5.0 | 31-Mar-17 | Link | #0 | Diesel Combustion Topic #6 Soot | Scott Skeen | Sandia |
| ECN 5.0 | 31-Mar-17 | Link | 1:00:00 | Diesel Combustion Malbec | Louis-Marie Malbec | IFPEN |
| ECN 5.0 | 31-Mar-17 | Link | #0 | Diesel Combustion Spray B Presentation | Louis-Marie Malbec | IFPEN |
| ECN 5.0 | 1-Apr-17 | Link | 0:00:00 | Spray G Intro | Scott Parrish | GM |
| ECN 5.0 | 1-Apr-17 | Link | #0 | Spray G Intro Presentation | Scott Parrish | GM |
| ECN 5.0 | 1-Apr-17 | Link | 0:11:56 | Nozzle geometry and near-nozzle experiments | Katie Matusik | Argonne |
| ECN 5.0 | 1-Apr-17 | Link | 0:55:20 | Internal and near-nozzle flow modeling | David Schmidt | UMass-Amherst |
| ECN 5.0 | 1-Apr-17 | Link | #0 | Internal and near-nozzle flow modeling Presentation | David Schmidt | UMass-Amherst |
| ECN 5.0 | 1-Apr-17 | Link | 0:02:20 | Liquid and Vapor Spray; Visualization Experiments and Modeling | Daniel Vaquerizo | CMT |
| ECN 5.0 | 1-Apr-17 | Link | #0 | Liquid and Vapor Spray; Visualization Experiments and Modeling Presentation | Daniel Vaquerizo | CMT |
| ECN 5.0 | 1-Apr-17 | Link | 0:38:50 | Liquid and Vapor velocity measurements in Spray G | Panos Sphicas | Imperial College |
| ECN 5.0 | 1-Apr-17 | Link | #0 | Liquid and Vapor velocity measurements in Spray G Presentation | Panos Sphicas | Imperial College |
| ECN 5.0 | 1-Apr-17 | Link | 0:54:02 | Spray G Lagrangian Modeling | Lyle Pickett | Sandia |
| ECN 5.0 | 1-Apr-17 | Link | #0 | Spray G Lagrangian Modeling Presentation | Lyle Pickett | Sandia |
| ECN 5.0 | 1-Apr-17 | Link | #0 | Future Direction: Multiple Injections | Scott Parrish | GM |
| ECN 5.0 | 1-Apr-17 | Link | #0 | Future Direction: Flash Boiling | Joshua Lacey | Melbourne |
| ECN 5.0 | 1-Apr-17 | Link | #0 | ECN Standardization Quantitative Extinction Imaging | Fredrik Westlye | DTU |
| ECN 5.0 | 1-Apr-17 | Link | #0 | ECN Standardization Experimental Temperature/Velocity Control | Moez Ben Houidi/Koji Yasutomi/Russ Fitzgerald | PPRIME Institute/Hino/Caterpillar |
| ECN 5.1 | 1-Jun-17 | Link | 0:00:00 | Quantification of Sauter Mean Diameter in Diesel Sprays using Scattering-Absorption Extinction Measurements | Gabrielle Martinez | Argonne |
| ECN 5.1 | 1-Jun-17 | Link | 0:15:35 | Effect of Fuel Injection Strategy on the Formation of Particles in a Disi Engine Fueled with Butanol | Adrian Irimescu | CNR |
| ECN 5.1 | 1-Jun-17 | Link | 0:32:43 | Impact over wall of a Spray G | Michela Costa | CNR |
| ECN 5.1 | 1-Jun-17 | Link | 0:52:55 | Modeling the Influence of Nozzle-Generated Turbulence on Diesel Sprays | Gina Magnotti | Argonne |
| ECN 5.1 | 1-Jun-17 | Link | 1:13:28 | A Large Eddy Simulation of the n-heptane Spray A | Simon Gallot-Lavallee | Imperial College, London |
| ECN 5.3 | 3-Aug-17 | Link | 0:00:00 | ECN5.3 mechanics and update on ECN6 calendar | Lyle Pickett | Sandia |
| ECN 5.3 | 3-Aug-17 | Link | 0:03:40 | Analytical Modeling of Diesel Spray Penetration after the End-of-Injection | Long Liu | Harbin Engineering University |
| ECN 5.3 | 3-Aug-17 | Link | 0:29:32 | Application of a Novel MMC Mixing Model to ECN Spray A | Achinta Varna | UNSW |
| ECN 5.3 | 3-Aug-17 | Link | 0:48:45 | The transition to dense fluid mixing and atomization suppression at Spray A conditions and beyond | Joshua Lacey | University of Melbourne |
| ECN 5.3 | 3-Aug-17 | Link | 1:08:26 | Multiple mapping conditioning simulations of a high-pressure n-dodecane reacting jet | Fatemeh Salehi | University of Sydney |
| ECN 5.3 | 3-Aug-17 | Link | 1:30:26 | Test bench setup and first measurements for Spray B in a light-duty optical engine | Ming Zhao | University of Duisberg Essen |
| ECN 5.4 | 7-Sep-17 | Link | 0:00:00 | Implementation of Detailed Chemistry Mechanisms for Low Temperature Combustion Simulations | Prithwish Kundu | Argonne |
| ECN 5.4 | 7-Sep-17 | Link | 0:20:13 | Experimental Estimation of Mixture Fractions at the Ignition Site | Louis-Marie Malbec | IFPEN |
| ECN 5.4 | 7-Sep-17 | Link | 0:40:45 | Gasoline injector spray collapse when varying injection duration or number of injections | Lyle Pickett | Sandia |
| ECN 5.5 | 5-Oct-17 | Link | 0:00:00 | ECN-related research at the University of Oxford | Joseph Camm | Oxford University |
| ECN 5.6 | 2-Nov-17 | Link | 0:01:59 | Searching For and Referencing Past Presentations on the ECN Website | Lyle Pickett | Sandia |
| ECN 5.6 | 2-Nov-17 | Link | 0:09:33 | Soot Temperature Characterization of Spray A Flames by Combined Extinction and Radiation | Tiemin Xuan | CMT |
| ECN 5.6 | 2-Nov-17 | Link | 0:28:04 | Quantitative LIF Imaging of Multicomponent Fuel Evaporation at Spray G Condition | Matthieu Cordier | IFPEN |
| ECN 5.7 | 8-Dec-17 | Link | 0:04:00 | Welcome and ECN 5.7 mechanics | Scott Skeen | Sandia |
| ECN 5.7 | 8-Dec-17 | Link | 0:05:12 | Fuel temperature in a Diesel Injector | Pedro Marti | CMT |
| ECN 5.7 | 8-Dec-17 | Link | 0:25:53 | ELSA of Spray A | Shaoping Quan | Convergent Science |
| ECN 5.7 | 8-Dec-17 | Link | 0:44:46 | Spray G flash boiling | Wayne Chang | University of Illinois |
| ECN 5.7 | 8-Dec-17 | Link | 1:00:07 | Hot Spray C and D | Shane Daly | Oregon State University |
| ECN 5.7 | 8-Dec-17 | Link | 1:18:21 | Asymmetry of Spray C cavitation | Brandon Sforzo | ANL |
| ECN 5.8 | 1-Feb-18 | Link | 0:00:00 | Welcome and ECN 5.8 mechanics | Gilles Bruneaux | IFPEN |
| ECN 5.8 | 1-Feb-18 | Link | 0:02:53 | Topic 1-3: Towards ECN6 | Michele Battistoni | University of Perugia |
| ECN 5.8 | 1-Feb-18 | Link | 0:18:33 | Spray G Lagrangian Modeling | Davide Paredi | Politecnico di Milano-Italy |
| ECN 5.8 | 1-Feb-18 | Link | 0:33:25 | Modeling Dynamic Coupling of Nozzle Flow and Spray for Spray G | Kaushik Saha | Argonne |
| ECN 5.8 | 1-Feb-18 | Link | 0:55:31 | LES Stochastic Field Modelling of Cavitation in Spray G2 | Boxiong Chen | Chalmers University |
| ECN 5.9 | 1-Mar-18 | Link | 0:00:00 | Presentation of the Agenda and Description of ECN6 Inscription Link | Raul Payri | UPV |
| ECN 5.9 | 1-Mar-18 | Link | 0:06:21 | Ducted Fuel Injection: A New Approach for Lowering Soot Emissions from Direct-Injection Engines | Chuck Mueller | Sandia |
| ECN 5.9 | 1-Mar-18 | Link | 0:21:16 | Experimental Characterization of Diesel and Gasoline Sprays | Carlo Coratella | University of Burmingham |
| ECN 5.9 | 1-Mar-18 | Link | 0:38:06 | Update on Neutron Diagnostics of Transportation Technologies | Martin Wissink | ORNL |
| ECN 5.9 | 1-Mar-18 | Link | 0:53:02 | Preliminary Spray A Simulations with Detailed Chemical Mechanisms | Nick Killingsworth | LLNL |
| ECN 5.9 | 1-Mar-18 | Link | 1:07:21 | Spray Characterization at Start of Injection for a Gasoline Direct Injector | Zongyu Yue | ANL |
| ECN 5.9 | 1-Mar-18 | Link | 1:21:31 | Development of a Transient Spray Cone Angle Correlation for CFD Simulations at Diesel Engine Conditions | Meng Tang | MTU |
| ECN 5.9 | 1-Mar-18 | Link | 1:38:45 | Liquid Extinction Analysis Compared to CFD | Lyle Pickett | Sandia |
| ECN 5.10 | 4-Apr-18 | Link | 0:00:00 | Introduction | Lyle Pickett | Sandia |
| ECN 5.10 | 4-Apr-18 | Link | 0:04:45 | Investigating the Spray Combustion Characteristics of Multi-Component Diesel Surrogate Fuels | Koji Yasutomi | Sandia |
| ECN 5.10 | 4-Apr-18 | Link | 0:26:54 | Mixture Fraction Measurements of Spray D using High-Speed Extinction Imaging with C70 Fullerene Doping | Shane Daly | Oregon State University |
| ECN 5.10 | 4-Apr-18 | Link | 0:42:39 | SJTU Capabilities for ECN Spray Research | Xuesong (Sean) Li | Shanghai Jiao Tong University (SJTU) |
| ECN 5.10 | 4-Apr-18 | Link | 0:55:00 | Direct Numerical Simulation of a Spatially Developing Jet Flame under Spray A Conditions | Deepak Dalakoti | University of New South Wales (UNSW) |
| ECN 5.11 | 3-May-18 | Link | 0:00:00 | Presentation of the Agenda and Description of ECN6 Inscription Link | Raul Payri | Universitat Politencia de Valencia |
| ECN 5.11 | 3-May-18 | Link | 0:01:16 | ECN6 Unified guidelines for Topics 4-5-6-7-8 - Diesel Combustion | Jose Maria Garcia-Oliver | UPV |
| ECN 5.11 | 3-May-18 | Link | 0:18:55 | Comparison of Transient Diesel Spray Breakup Between Two CFD Codes | Louis Nicholson | Oxford University |
| ECN 5.11 | 3-May-18 | Link | 0:33:39 | Simulation of ECN Sprays with an LES Turbulent Dispersion Model | Hongjiang Li | WISC |
| ECN 5.11 | 3-May-18 | Link | 0:46:29 | A Coupled Design of Experiment Approach with RANS for High Pressure Spray Injection Modelling | Daniel Nsikane | Ricardo Innovation/University of Brighton |
| ECN 5.11 | 3-May-18 | Link | 1:05:53 | Numerical Study of the Cone Angle Effect on Spray "A" Ignition Delay | S. Hadi Seyedi | Wayne State |
| ECN 5.11 | 3-May-18 | Link | 1:21:25 | Effect of Nozzle Geometry on Diesel Spray and Combustion: Experimental and Modeling Investigation | Khanh Cung | Southwest Research Institute |
| ECN 5.12 | 7-Jun-18 | Link | 0:00:00 | Presentation of the Agenda and Description of ECN6 Inscription Link | Gilles Bruneaux | IFPEN |
| ECN 5.12 | 7-Jun-18 | Link | 0:02:40 | Spray G in Optical Accessible IC Engine | Patrick Kranz | University of Duisburg-Essen |
| ECN 5.12 | 7-Jun-18 | Link | 0:22:00 | Comparison of LOL determination methodologies in Spray A Configuration | Christine Rousselle | PRISME |
| ECN 5.13 | 5-Jul-18 | Link | 0:00:00 | Introduction | Lyle Pickett | Sandia |
| ECN 5.13 | 5-Jul-18 | Link | 0:02:51 | Gasoline Spray (Spray G) Droplet Sizing under Flash-boiling G2 Conditinos | Xuesong "Sean" Li | Shanghai Jiao Tong University |
| ECN 5.13 | 5-Jul-18 | Link | 0:19:42 | Atomization of Spray B with dodecane and xME Fuels | Yakup Kaya | RWTH Aachen University |
| ECN 5.13 | 5-Jul-18 | Link | 0:35:16 | High-Fidelity LES of Reacting Spray A | Mathis Bode | RWTH Aachen University |
| ECN 5.13 | 5-Jul-18 | Link | 0:50:48 | Methodology and Experimental Uncertainty of Spray B Measurements in University of Duisburg-Essen | Ming Zhao | University of Duisburg-Essen |
| ECN 5.13 | 5-Jul-18 | Link | 1:20:38 | Effects of Engine Speed on Spray G | Luis Gutierrez | University of Michigan |
| ECN 5.13 | 5-Jul-18 | Link | 1:39:42 | DNS of a turbulent, self-igniting n-dodecane jet | Giulio Borghesi | Sandia |
| ECN 5.13 | 5-Jul-18 | Link | 2:07:24 | International Journal of Engine Research - Call for Papers | Todd Fansler | University of Wisconsin |
| ECN 5.13 | 5-Jul-18 | Link | 2:10:08 | Closing Comments about the Plan for ECN6 | Lyle Pickett | Sandia |
| ECN 6.0 | 10-Sep-18 | Link | 0:00:00 | ECN6 Introduction Presentation | Lyle Pickett, Gilles Bruneaux, Raul Payri | Sandia, IFPEN, CMT |
| ECN 6.0 | 10-Sep-18 | Link | 0:32:52 | X-Ray Diagnostics of ECN Spray G | Christopher Powell | ANL |
| ECN 6.0 | 10-Sep-18 | Link | 0:58:00 | Internal and Near-Nozzle Flow Gasoline Spray | David Schmidt | Umass |
| ECN 6.0 | 10-Sep-18 | Link | 1:55:48 | Evaporative Spray G (External, Plume Interaction, Flash Boiling) | Tommaso Lucchini/Alessandro Montanaro | Politecnico di Milano |
| ECN 6.0 | 10-Sep-18 | Link | 3:01:32 | Spray G in Engines | Joaquin De la Morena | CMT |
| ECN 6.0 | 10-Sep-18 | Link | 0:00:45 | Diesel Internal and Near-Nozzle Flows; Presentation 1 | Mathis Bode | Aachen University |
| ECN 6.0 | 10-Sep-18 | Link | 0:26:13 | Diesel Internal and Near-Nozzle Flows; Presentation 2 | Mathis Bode | Aachen University |
| ECN 6.0 | 10-Sep-18 | Link | 1:01:26 | Primary Atomization (Near-Nozzle Mixing) | Michele Battistoni | University of Perugia |
| ECN 6.0 | 11-Sep-18 | Link | 0:00:00 | Topic Flame Structure | Louis-Marie Malbec | IFPEN |
| ECN 6.0 | 11-Sep-18 | Link | 0:57:16 | Diesel Combustion - Heat Release | Jose M Garcia-Oliver | CMT |
| ECN 6.0 | 11-Sep-18 | Link | 0:00:00 | Spray B in Engines | Louis-Marie Malbec | IFPEN |
| ECN 6.0 | 11-Sep-18 | Link | 0:30:31 | Emissions: Soot | Scott Skeen | Sandia |
| ECN 6.1 | 8-Nov-18 | Link (Audio Only) | 0:00:00 | A conceptual model of the flame stabilization mechanisms for a lifted Diesel-type flame based on Direct Numerical Simulation and experiments | Fabien Tagliante | IFPEN |
| ECN 6.1 | 8-Nov-18 | Link (Audio Only) | 0:14:37 | Preparation for Spray D study at KAUST | Jianguo Du | KAUST |
| ECN 6.1 | 8-Nov-18 | Link (Audio Only) | 0:25:31 | The Role of Linear Stability in Primary Atomization using High Fidelity Spray A Simulations | Mario Trujillo | University of WisconsinMadison |
| ECN 6.1 | 8-Nov-18 | Link (Audio Only) | 0:43:50 | After ECN6, how to archive selected experimental and modeling data? | Lyle Pickett | Sandia |
| ECN 6.1 | 8-Nov-18 | Link (Audio Only) | 1:08:14 | Presentation of a Special issue related to ECN topic on International Journal of Engine Research | Raul Payri | UPV |
| ECN 6.2 | 6-Dec-18 | Link | 0:00:40 | Cavitation sources for Spray D | Koji Yasutomi | Hino Motors |
| ECN 6.2 | 6-Dec-18 | Link | 0:18:50 | Comparison of Spray C & D reacting experimental data | Noud Maes | TU/e |
| ECN 6.2 | 6-Dec-18 | Link | 0:30:59 | Presentation of Agenda for "CFD-archive" ECN committee meeting | Lyle Pickett | Sandia |
| ECN 6.2 | 6-Dec-18 | Link | 0:39:24 | Discussion items for "CFD-archive" ECN committee meeting | Mathis Bode | Aachen University |
| ECN 6.3 | 7-Feb-19 | Link | 0:06:50 | Development of limited-view tomography for measurement of Spray-G plume direction and liquid volume fraction | Lukas Weiss | Erlangen-Nuremberg |
| ECN 6.3 | 7-Feb-19 | Link | 0:24:43 | Spatially and temporally resolved liquid volume fraction at G2 and G3 conditions with different fuels | Joonsik Hwang | Sandia |
| ECN 6.3 | 7-Feb-19 | Link | 0:42:42 | New Denso Supplied ECN "Spray A" Injectors | Scott Skeen | Sandia |
| ECN 6.3 | 7-Feb-19 | Link | 0:49:50 | Detailed soot modeling of the Spray A injector | Tyler Strickland | University of WisconsinMadison |
| ECN 6.3 | 7-Feb-19 | Link | 1:05:19 | Sharp-interface simulation of Spray G primary atomization for iso-octance and an oxygenated fuel blend | Marco Arienti | Sandia |
| ECN 6.4 | 7-Mar-19 | Link | 0:02:04 | Gasoline-like fuel compression ignition under near Spray A conditions | Mark Zhai | UNSW |
| ECN 6.4 | 7-Mar-19 | Link | 0:19:50 | Diesel Injector (Spray A and C/D) Elasticity Effects on Start of Injection | Koji Yasutomi | Hino Motors |
| ECN 6.4 | 7-Mar-19 | Link | 0:48:09 | Numerical Studies on Spray A/D Ignition and Flame Stabilization | Leonardo Pachano | CMT |
| ECN 6.5 | 4-Apr-19 | Link | 0:01:58 | Towards ECN7 Detroit area (exact location to be defined) | Gilles Bruneaux | IFPEN |
| ECN 6.5 | 4-Apr-19 | Link | 0:13:30 | 3D Imaging of Spray C #37 Using X-Ray Micro-CT | Aniket Tekawade | ANL |
| ECN 6.6 | 2-May-19 | Link | 0:01:48 | CFD Analysis of Heat Release in ECN-Type Vessels | Jose M. Garcia-Oliver | CMT |
| ECN 6.6 | 2-May-19 | Link | 0:20:42 | Effects of the Ambient and Injection Conditions on the Spray Structure and Evaporation of the ECN Spray G | Alessandro Montanaro | Instituto Motori |
| ECN 6.6 | 2-May-19 | Link | 0:39:25 | Real-Fluid Injection Modeling and LES Simulation of the ECN Spray A Injector Using a Fully Compressible Two-Phase Flow Approach | Songzhi Yang | IFPEN |
| ECN 6.6 | 2-May-19 | Link | 0:57:07 | Modeling Sub-Grid Scale Energy Dissipation Rate in Large-Eddy Spray Simulations | Hongjiang Li | University of Wisconsin-Madison |
| ECN 6.6 | 2-May-19 | Link | 1:13:21 | An Investigation of Soot Evolution in High-Pressure Spray Combustion | Khaled Mosharraf Mukut | Marquette University |
| ECN 6.6 | 2-May-19 | Link | 1:30:06 | Presentation of ECN7 to be held in Detrait in April 2020 | Raul Payri | UPV |
| ECN 6.7 | 6-Jun-19 | Link | 0:02:08 | Imaging of tip wetting at Spray G2 conditions | Joonsik Hwang | Sandia |
| ECN 6.7 | 6-Jun-19 | Link | 0:16:14 | Les Studies of Split-Injection for Spray A | Wanhui Zhao | Tianjin University |
| ECN 6.8 | 11-Jul-19 | Link | 0:02:51 | Effect of residual gases on soot production of SPRAY A conditions | Chetan Patel | University of Orleans |
| ECN 6.8 | 11-Jul-19 | Link | 0:26:25 | Effect of diagnostics on ignition delay measurements for ECN Spray B | Ming Zhao | University of Duisburg-Essen |
| ECN 6.8 | 11-Jul-19 | Link | 0:42:38 | A multispectral, extinction-based diagnostic for high-pressure spray field quantification | Farzad Poursadegh | Georgia Institute of Technology |
| ECN 6.8 | 11-Jul-19 | Link | 1:01:52 | Spray break-up/propogation of synthetic fuels for CI-Engines | Mathis Bode | Institute for Combustion Technology |
| ECN 6.8 | 11-Jul-19 | Link | 1:17:02 | Examination of diesel-spray combustion in supercritical ambient fluid using large-eddy simulations | Wai Tong Chung | Stanford University |
| ECN 6.9 | 5-Sep-19 | Link | 0:03:57 | Multi-component Fuel Spray Modeling for Vaporization and Flash Boiling | Andy Yan and Suya Gao | University of Illinois |
| ECN 6.9 | 5-Sep-19 | Link | 0:25:04 | In-Nozzle Flow Large Eddy Simulations of ECN Spray C Under Realistic Operating Conditions with N-Dodecane and Iso-Octane Fuels | Hengjie Guo | Argonne |
| ECN 6.9 | 5-Sep-19 | Link | 0:43:26 | Modeling Spray A with non-spherical droplets | Tuan M. Nguyen | Sandia |
| ECN 6.9 | 5-Sep-19 | Link | 0:57:35 | An update on Spray G measurements in a constant flow vessel | Joonsik Hwang | Sandia |
| ECN 6.9 | 5-Sep-19 | Link | 1:13:58 | The Effect of Chemical Kinetic Mechanism Size on CFD Simulations of ECN Spray A | Nick Killingsworth | LLNL |
| ECN 6.9 | 5-Sep-19 | Link | 1:31:42 | DNS of Spray A multi-injection mixing and ignition | Martin Rieth | Sandia |
| ECN 6.11 | 7-Nov-19 | Link | 0:01:52 | Validation measurements of OptiVeP with ECN DSA | Lukas Weiss | Erlangen-Nuremberg |
| ECN 6.11 | 7-Nov-19 | Link | 0:15:02 | Virtual Diagnostics - How to compare experiments and simulations | Christian Hasse | Tech. U. Denmark |
| ECN 6.11 | 7-Nov-19 | Link | 0:41:13 | Re-assessment of Spray G penetration measurement | Joonsik Hwang | Sandia |
| ECN 6.12 | 5-Dec-19 | Link | 0:02:54 | Two-Phase Flow and Turbulence Models Parameter Sensitivity Analysis and Optimization using "Spray A" as reference case | Damien Aubagnac-Karkar | IFPEN |
| ECN 6.12 | 5-Dec-19 | Link | 0:22:19 | Topic 10: A Newborn Topic; Updates | Michele Bardi | IFPEN |
| ECN 6.12 | 5-Dec-19 | Link | 0:28:54 | Spray Impingement Experiments - Wall Design | Lyle Pickett | Sandia |
| ECN 6.12 | 5-Dec-19 | Link | 0:33:41 | Development of Quantitave Experimental Diagnostics for the Characterization of Pool Fires at Engine-Like Conditions | Michele Bardi | IFPEN |
| ECN 6.12 | 5-Dec-19 | Link | 0:43:25 | Simultaneous High-Speed Formaldehyde PLIF and Schlieren Imaging of Spray A | Hyung Sub Sim | Sandia |
| ECN 6.13 | 6-Feb-20 | Davidovic's Presentation | - | LES of Spray A using the Hybrid Method of Moments Soot Model | M. Davidovic | RWTH Aachen University |
| ECN 6.13 | 6-Feb-20 | Tagliante's Presentation | - | Evaluation of hybrid LLNL 65 species mechanism including formaldehyde and OH*, and lift-off length definition | Fabien Tagliante | Sandia |
| ECN 6.13 | 6-Feb-20 | Battistoni's Presentation | - | Simulations of fuel spray transients in single (spray A & C/D-like) and multi-hole (spray B) injectors | Michele Battistoni | University of Perugia |
| ECN 6.14 | 5-Mar-20 | Link | 0:02:50 | CFD Predicted Characteristics of Two-Pulse Injection Jet Interactions [Evaporating-only (non-combusting) jets] | Randy Hessel | University of Wisconsin |
| ECN 6.14 | 5-Mar-20 | Link | 0:16:46 | A New Wireframe Geometry for Spray D Internal Flow Calculations | Lyle Pickett | Sandia |
| ECN 6.14 | 5-Mar-20 | Link | 0:29:28 | Thermal Effects in Diesel Injection: Application for the Spray-D Injector | Foivos Koukouvinis | Sandia |
| ECN 6.14 | 5-Mar-20 | Link | 0:46:16 | High-speed formaldehyde and PAH imaging of Spray C and D | Noud Maes | Sandia |
| ECN 6.14 | 5-Mar-20 | Link | 1:02:13 | Spray G experiments with E00 3-component fuel | Joonsik Hwang | Sandia |
| ECN 6.14 | 5-Mar-20 | Link | 1:20:48 | Preliminary Examination of Spray G - Wall Impingement with X-Ray Diagnostics and CFD | Brandon Sforzo | Argonne |
| ECN 6.14 | 5-Mar-20 | Link | 1:39:17 | Development of Quantitative Experimental Diagnostics for the Characterization of Pool Fires at Engine-Line Conditions | Kamal Shway | IFPEN |
| ECN 6.15 | 7-May-20 | Link | 0:03:28 | Importance of LES subgrid modeling in a spray combustion and its effect on soot modeling | Hesheng Bao | TU/e |
| ECN 6.15 | 7-May-20 | Link | 0:22:05 | The Effect of Chemical Kinetic Mechanism on CFD Simulations of ECN Spray A | Nick Killingsworth | LLNL |
| ECN 6.15 | 7-May-20 | Link | 0:46:54 | High-speed Formaldehyde and High-Temperature Reaction Structure of Spray A using PRF80 | Hyung Sub Sim | Sandia |
| ECN 6.15 | 7-May-20 | Link | 1:02:53 | Experimental characterization of gas temperature at Spray A conditions | Noud Maes | Sandia |
| ECN 6.15 | 7-May-20 | Link | 1:21:42 | Considerations for the temperature stratification in a pre-burn constant-volume cumbustion chamber: Impact of stratified initial gas temperature on predicted auto-ignition delay and flame stabilization of Spray A | Fabien Tagliante | Sandia |
| ECN 7.0.1 | 10-Jun-20 | Link | 0:00:12 | ECN7 Introduction Presentation | Lyle Pickett, Gilles Bruneaux, Raul Payri | Sandia, IFPEN, CMT |
| ECN 7.0.1 | 10-Jun-20 | Link | 0:34:41 | Topic 7: Internal & Near-Nozzle Flow | Brandon Sforzo | Argonne |
| ECN 7.0.1 | 10-Jun-20 | Link | 1:01:46 | Topic 8: Evaporative Spray G (external, plume interaction, flash boiling) | Tommaso Lucchini/Louis-Marie Malbec | Politecnico di Milano |
| ECN 7.0.1 | 10-Jun-20 | Link | 1:29:40 | Topic 9: Spray G in Engines | Benjamin Bohm | TU Darmstadt |
| ECN 7.0.1 | 10-Jun-20 | Link | 1:52:42 | Topic 10: Spray G wall impact and combustion | Michele Bardi | IFPEN |
| ECN 7.0.1 | 10-Jun-20 | Link | 2:22:50 | Gasoline Sprays Panel Discussion | Lyle Pickett, Gilles Bruneaux, Raul Payri | Sandia, IFPEN, CMT |
| ECN 7.0.2 | 17-Jun-20 | Link | 0:00:08 | Diesel Sprays Introduction | Lyle Pickett | Sandia |
| ECN 7.0.2 | 17-Jun-20 | Link | 0:11:31 | Internal and Near-Nozzle Synchrotron X-Ray Diagnostics for Spray C | Aniket Tekawade | Argonne |
| ECN 7.0.2 | 17-Jun-20 | Link | 0:28:11 | Topic 1: Diagnostics for injection transients and gas exchange | Julien Manin | Sandia |
| ECN 7.0.2 | 17-Jun-20 | Link | 0:50:48 | Gas exchange and thermal effects during fast transients: application for Spray C/D | Foivos Koukouvinis | Sandia |
| ECN 7.0.2 | 17-Jun-20 | Link | 1:05:52 | Internal Flow and Near-Field of Spray C & D | Michele Battistoni | University of Perugia |
| ECN 7.0.2 | 17-Jun-20 | Link | 1:21:40 | Near-Field Evaporation of Spray D Under Hot Conditions | Mathis Bode | Aachen University |
| ECN 7.0.2 | 17-Jun-20 | Link | 1:35:03 | Mixing of Spray C & D Downstream of the Liquid Length | Russ Fitzgerald | Caterpillar |
| ECN 7.0.2 | 17-Jun-20 | Link | 2:01:39 | Diesel Sprays Panel Discussion | Lyle Pickett | Sandia |
| ECN 7.0.3 | 25-Jun-20 | Link | 0:00:20 | Diesel Combustion Introduction | Raul Payri | CMT |
| ECN 7.0.3 | 25-Jun-20 | Link | 0:11:32 | Fuel Effect on Compression Ignition | Yuanjiang Pei, Emma Zhao | Aramco Americas, Argonne |
| ECN 7.0.3 | 25-Jun-20 | Link | 0:41:27 | Ignition Chemistry | Nick Killingsworth | LLNL |
| ECN 7.0.3 | 25-Jun-20 | Link | 1:11:31 | Flame Structure Topic | Leonardo Pachano | CMT |
| ECN 7.0.3 | 25-Jun-20 | Link | 1:40:09 | Topic 6: Soot-Soot-Soot | Noud Maes | Sandia |
| ECN 7.0.3 | 25-Jun-20 | Link | 2:10:29 | Diesel Combustion Panel Discussion | ||
| ECN 7.1 | 3-Nov-20 | Link | 0:00:08 | COVID-19 Recap and Future ECN8 Goals | Lyle Pickett | Sandia |
| ECN 7.1 | 3-Nov-20 | Link | 0:08:59 | Tabulated flamelet models for split injections of Spray A | Cody Nunno | Argonne |
| ECN 7.1 | 3-Nov-20 | Link | 0:24:10 | Rate of Injection Characterization of ECN "Chicken Foot" Injectors | Victor Mendoza | CMT |
| ECN 7.1 | 3-Nov-20 | Link | 0:31:51 | Proposed Surrogate Fuel for Gasoline Spray and Combustion featuring Spray G Measurements | Foivos Koukouvinis | City U |
| ECN 7.1 | 3-Nov-20 | Link | 0:44:36 | Experimental Progress on Spray A Liquid Penetration Measurements Using Quantative Extinction Imaging | Lyle Pickett | Sandia |
| ECN 7.1 | 3-Nov-20 | Link | 1:04:21 | Corrected Distortion Modeling Effects on Spray A Vaporization | Tuan M. Nguyen | Sandia |
| ECN 7.3 | 2-Feb-21 | Link | 0:04:18 | Image Processing of Vaporizing Sprays: A Curvature Based Approach | Maurizio Lazzaro | CNR |
| ECN 7.3 | 2-Feb-21 | Link | 0:24:15 | Numerical Investigation of the ECN Spray G | Giovanni Tretola | University of Brighton |
| ECN 7.3 | 2-Feb-21 | Link | 0:46:20 | Internal Nozzle Flow Modeling of ECN Spray G Injector Using Surrogate Fuels | Maria Martinez | CMT |
| ECN 7.3 | 2-Feb-21 | Link | 1:08:47 | Spray Collapse Analysis Through MIE Frontal View | Abian Bautista | CMT |
| ECN 7.3 | 2-Feb-21 | Link | 1:28:22 | Measurement of Plume to Plume variations for Spray G with implications on CFD comparisons | Logan White | Sandia |
| ECN 7.4 | 4-Mar-21 | Link | 0:01:40 | Using physics-informed enhanced super-resolution generative adversairal networks (PIESRGAN) for subfilter modeling of Spray A | Mathis Bode | Aachen University |
| ECN 7.4 | 4-Mar-21 | Link | 0:20:54 | NEK5000 Simulations of Spray A and G | Juan Diego Colmenares | Argonne |
| ECN 7.4 | 4-Mar-21 | Link | 0:37:24 | Spray G and G2 Simulations using a thermally limited bubble growth model | Marco Arienti | Sandia |
| ECN 7.4 | 4-Mar-21 | Link | 0:55:01 | Fuel pyrolysis, PAH, and soot formation using Spray A-3 injector | Kevin Wan | Sandia |
| ECN 7.4 | 4-Mar-21 | Link | 1:10:47 | Application of an optimized mechanism to Spray A with Primary Reference Fuels | Jose Marie Garcia | CMT |
| ECN 7.6 | 6-May-21 | Link | 0:00:14 | Investigation of the Engine Combustion Network Spray C Characteristics using Eulerian Model | Moaz Allehaibi | KAUST |
| ECN 7.6 | 6-May-21 | Link | 0:19:11 | Large-Eddy Simulation of Tri-Fuel Combustion: Diesel Spray Assisted Ignition of Methanol-Hydrogen Blends | Mahmoud Gadalla | Aalto |
| ECN 7.6 | 6-May-21 | Link | 0:36:04 | ECN Spray G injector: numerical modelling of flash-boiling breakup and spray collapse | Francesco Duronio | UDSDA, STEMS |
| ECN 7.6 | 6-May-21 | Link | 0:52:42 | ECN - Spray Chicken Foot Characterization/Momentum Flux Measurement | Victor Mendoza | CMT |
| ECN 7.6 | 6-May-21 | Link | 1:06:36 | Spray A, C, and D: an FGM-LES study with a LES-specific dispersion modeling approach | Hesheng Bao | TU/e |
| ECN 7.6 | 6-May-21 | Link | 1:24:23 | Development of Heavy-Duty LPG Engine with Near-Diesel Engine Efficiency | Bret Windom | U.S. DOE, Argonne |
| ECN 7.6 | 6-May-21 | Link | 1:44:12 | Numerical investigation of the free and ducted fuel injection strategies fueled with n-dodecane | Xinlei Liu | KAUST |
| ECN 7.7 | 4-Jun-21 | Link | 0:01:16 | ECN 8 Diesel Spray Guidelines | Jose Maria Garcia, Michele Battistoni, Noud Maes, Yuanjiang Pei, Julien Manin | - |
| ECN 7.7 | 4-Jun-21 | Link | 0:33:20 | Development of Quantitative Experimental Diagnostics for the Characterization of Pool Fires at Engine-Line Conditions | Kamal Shway | IFPEN |
| ECN 7.7 | 4-Jun-21 | Link | 0:54:13 | Spray G Lagrangian Simulations Utilizing Injector Tip Geometry and Variable Mass Flow Rate Between Plumes | Tuan M. Nguyen | Sandia |
| ECN 7.8 | 1-Jul-21 | Link | 0:01:30 | Spray Pyrolysis CFD Modeling: Preliminary Assessment | Leonardo Pachano, Damien Aubagnac-Karkar | IFPEN |
| ECN 7.8 | 1-Jul-21 | Link | 0:19:50 | X-Ray Radiography of Spray B with Parametric Variations | Alan Kastengren, Christopher F. Powell | Argonne |
| ECN 7.8 | 1-Jul-21 | Link | 0:42:00 | Development of a Merit Function, Applied to Spray G, Allowing Automated and Extensive Evaluation of CFD Results Against Experiments | Fabien Tagliante, Tuan Nguyen, Lyle Pickett, Logan White | Sandia |
| ECN 7.10 | 7-Oct-21 | Link | 0:04:26 | End of Injection Studies of Spray G Injector | Chinmoy Mohapatra | UMass-Amherst |
| ECN 7.10 | 7-Oct-21 | Link | 0:24:34 | Detailed Evaporation Modelling for Gasoline Direct Injection: Iso-Octane vs. E30 | Marco Arienti, Everett Wenzel | Sandia |
| ECN 7.10 | 7-Oct-21 | Link | 0:41:12 | Spray D, Spray A-3, and Spray A Mixing Measurements via Rayleigh Scattering | Kevin Wan, Julien Manin | Sandia |
| ECN 7.11 | 4-Nov-21 | Link | 0:02:30 | Shot to Shot Variations and Fuels Effect in a Constant Pressure Test Facility Using Synchronized Color Schlieren, OH* Chemiluminescence, and 2-Color Pyrometry | Ajay K Agrawal, Joshua Bittle | University of Alabama |
| ECN 7.11 | 4-Nov-21 | Link | 0:20:20 | Large-Eddy Simulations of OME Spray Flames at ECN Spray A Nominal Conditions | Daniel Mira, Anurag Surapaneni, Eduardo J. Perez-Sanchez, Ambrus Both, J.M. Pastor, J.M. Garcia-Oliver | Barcelona Supercomputing Center |
| ECN 7.11 | 4-Nov-21 | Link | 0:34:03 | Internal & Near-Nozzle Flow/Evaporative Sprays | Brandon Sforzo, Tommaso Lucchini | ANL/CNR |
| ECN 7.11 | 4-Nov-21 | Link | 0:42:34 | Spray G in Engines | Benjamin Bohm | Tu Darmstadt |
| ECN 7.11 | 4-Nov-21 | Link | 0:49:06 | Spray G Wall Impact and Combustion: Guidelines Introduction | Michele Bardi | IFPEN |
| ECN 7.13 | 3-Feb-22 | Link | 0:01:45 | ECN8 Details | Lyle Pickett | Sandia |
| ECN 7.13 | 3-Feb-22 | Link | 0:11:35 | ECN CFD Data Archive | Tuan Nguyen, Fabien Tagliante, Nathan Prisbrey, Lyle Pickett, Tyler Strickland | Sandia |
| ECN 7.13 | 3-Feb-22 | Link | 0:23:35 | A New CVCC for High Pressures and Densities | Akhmad Alhikami, Jianguo Du, Bassam Aljohani, Moez Houidi, Balaji Mohan, William Roberts | KAUST |
| ECN 7.13 | 3-Feb-22 | Link | 0:37:35 | The Influence of Unwanted Scattering Effects on DBI Measurements | Bastian Lehnert | Erlangen-Nuremberg |
| ECN 7.13 | 3-Feb-22 | Link | 0:54:11 | Bulk Spray and Individual Plume Characterization of LPG and Iso-Octane Sprays at Engine-like Conditions | Manav Sharma | Colorado State University |
| ECN 7.13 | 3-Feb-22 | Link | 1:07:16 | Numerical Modeling of Transcritical Liquid Break up at ECN Spray A Conditions | Dorrin Jarrahbashi | Texas A&M |
| ECN 7.13 | 3-Feb-22 | Link | 1:24:45 | The Role of Cool-Flame Fluctuations in High-Pressure Spray Flames, Studied Using High-Speed Optical Diagnosticts and Large-Eddy Simulations | Fabien Tagliante, Tuan Nguyen, Meghna Dhanji, Hyung Sim, Lyle Pickett, Julien Manin, Goutham Kukkadapu, Russell Whitesides, Kevin Wan | Sandia |
| ECN 7.14 | 3-Mar-22 | Link | 0:03:00 | Spray A-3 Measurements Using OME3-5 | Kevin Wan, Julien Manin, Hyung Sub Sim, Noud Maes, Lyle Pickett | Sandia |
| ECN 7.14 | 3-Mar-22 | Link | 0:19:37 | eSpray - Injection, Mixing and Autoignition of e-Fuels for CI Engines | Frederik Wiesmann | IFA |
| ECN 7.14 | 3-Mar-22 | Link | 0:33:30 | Injection, Mixing, and Autoignition of OME in the Optical Engine Using the Spray B Injector | Esra Bauer | Duisburg Essen |
| ECN 7.14 | 3-Mar-22 | Link | 0:52:54 | Towards Full Injector/Engine Simulations with Advanced Subfilter Models | Mathis Bode | RWTH Aachen University |
| ECN 7.14 | 3-Mar-22 | Link | 1:08:50 | Spray A Double-Injection DNS and OME Flamelet Analysis | Martitn Rieth, Jackie Chen, Marc Day, Christian Hasse | Sandia |
| ECN 7.14 | 3-Mar-22 | Link | 1:19:26 | Update of Sandia Experimental 3D Liquid Volume Fraction Spray G Data | Joonsik Hwang, Logan White, Lyle Pickett, Zachary Buen | Sandia |
| ECN 7.14 | 3-Mar-22 | Link | 1:32:05 | High-Speed Laser-Induced Fluorescence Measurements of Fuel Film Thickness in Impinging GDI Sprays | Logan White, Julien Manin, Lyle Pickett, Tuan Nguyen | Sandia |
| ECN 8.0 | 1-Apr-22 | Link | 0:00:00 | ECN Achievements and Future | Lyle Pickett, Gilles Bruneaux, Raul Payri | Sandia, IFPEN, CMT |
| ECN 8.0 | 1-Apr-22 | Link | 0:05:00 | Topic 1: Internal Flow and Near Field | Michele Battistoni, Moaz Allehaibi | University of Perugia, KAUST |
| ECN 8.0 | 1-Apr-22 | Link | 0:00:55 | Topic 2: Vaporizing Spray | Noud Maes | Eindhoven University |
| ECN 8.0 | 1-Apr-22 | Link | 0:00:30 | Topic 3: Ignition and Flame | Jose Garcia-Oliver | CMT |
| ECN 8.0 | 1-Apr-22 | Link | 0:01:10 | Topic 4: Flame Morphology and Emissions | Julien Manin, Tuan Nguyen, Fabien Tagliante | Sandia |
| ECN 8.0 | 1-Apr-22 | Link | 0:00:25 | Research Presentation and Explanation of Oakland U Laboratories | Dan DelVescovo | Oakland University |
| ECN 8.0 | 1-Apr-22 | Link | 0:00:00 | Future Directions | - | - |
| ECN 8.0 | 2-Apr-22 | Link | 0:08:48 | Topic 7: Gasoline Internal and Near Nozzle Flows | Brandon Sforzo, Hengjie Guo | ANL |
| ECN 8.0 | 2-Apr-22 | Link | 0:00:10 | Topic 8: Gasoline Evaporation | Tommaso Lucchini, Zachary Buen, Joonsik Hwang, Fabien Tagliante, Tuan Nguyen | Politecnico di Milano, Sandia, Mississippi State University |
| ECN 8.0 | 2-Apr-22 | Link | 0:00:15 | Topic 9: Spray G in Gasoline Engines | Benjamin Bohm | TU Darmstadt |
| ECN 8.0 | 2-Apr-22 | Link | 0:00:00 | Topic 10: Spray Impingement and Combustion | Michele Bardi, Logal White, Meghnaa Dhanji, Tuan Nguyen | IFPEN, Sandia |
| ECN 8.1 | 2-Jun-22 | Link | 0:01:30 | Summary of the Minutes of ECN8 Workshop | Raul Payri | UPV |
| ECN 8.1 | 2-Jun-22 | Link | 0:11:06 | A New High-Pressure and High-Temperature Facility for Spray and Combustion Diagnostics | Jeremy Manus, Wesley Boyette, Jeffrey Sutton | Ohio State University |
| ECN 8.1 | 2-Jun-22 | Link | 0:24:10 | Detailed Evaporation Modeling for Gasoline Direct Injection: Iso-Octane vs. E30 | Marco Arienti, Everett Wenzel | Sandia |
| ECN 8.1 | 2-Jun-22 | Link | 0:43:55 | Investigation of Formaldehyde and PAH Behavior Using LES of N-dodecane and OME | Tuan Nguyen, Fabien Tagliante, Julien Manin, Lyle Pickett, Hyung-Sub Sim, Kevin Wan, Angela Wu | Sandia |
| ECN 8.1 | 2-Jun-22 | Link | 1:01:16 | Updates on the Combined Experimental and CFD Studies of Transient Heat Transfer Trends of Fuel Sprays Impinging on a Surface | Meghnaa Dhanji, Tuan Nguyen, Logan White, Lyle Pickett, Julien Manin | Sandia |
| ECN 8.3 | 1-Sep-22 | Link | 0:00:00 | Plans for ECN9 | Lyle Pickett | Sandia |
| ECN 8.3 | 1-Sep-22 | Link | 0:10:18 | Evaluation of the Unsteady Flamelet Progress Variable Approach in Large Eddy Simulation of the ECN Spray A | P. Haspel, S. Gierth, A. Scholtissek, Z. Sun, S. Popp, C. Hasse | TU Darmstadt |
| ECN 8.3 | 1-Sep-22 | Link | 0:28:19 | Methanol and OME Spray D Experiments | Kevin Wan, Francesco Di Sabatino, Julien Manin | Sandia |
| ECN 8.3 | 1-Sep-22 | Link | 0:50:29 | LES of Spray A in a Ducted Fuel Injection Configuration | Jiun Cai Ong, Min Zhang, Morten Skov Jensen, Jens Walther | Technical University of Denmark |
| ECN 8.4 | 6-Oct-22 | Link | 0:01:04 | Vortex and Cavitation Driven Atomization in Gasoline Direct Injection | Junmei Shi, Eduardo Santos, Ramesh Venkatasubramanian, Guy Hoffmann, Wolfgang Bauer | Borgwarner |
| ECN 8.4 | 6-Oct-22 | - | - | Hydrogen Injection Results, Present Some Model Validations and Jet Penetration and Jet Volume Correlations | Junmei Shi | Borgwarner |
| ECN 8.4 | 6-Oct-22 | Link | 0:00:46 | The Argon Power Cycle: Characterizing Hydrogen Injections | Max Peters | TU/e |
| ECN 8.4 | 6-Oct-22 | Link | 0:19:18 | Computational Investigation on Auto-Ignition of Liquid Ammonia Spray under Engine Conditions | Ahmad Bakir, Peng Zhao, Haiwen Ge | University of Tennessee Space Institute |
| ECN 8.4 | 6-Oct-22 | Link | 0:38:04 | A Complete Workflow of Internal Nozzle Flow and Engine Combustion Simulation using PACE-20 Multi-Component Fuel at Flashing Conditions | B. Mandumpala Devassy, J. Strucl | AVL |
| ECN 8.5 | 3-Nov-22 | Link | 0:02:24 | Simulation of Ammonia Sprays Under Flashing and Evaporative Conditions in a Multi-Hole Injector | Jacopo Zembi | University of Perugia |
| ECN 8.5 | 3-Nov-22 | Link | 0:25:37 | Multiple Scattering Suppression for Correct Light Transmission Measurements Through the ECN Spray G Running with Ethanol | Mehdi Stiti | Lund |
| ECN 8.5 | 3-Nov-22 | Link | 0:38:12 | Simulations and Corrections of Multiple Scattering Applied to Spray G | Bastian Lehnert | LTT Erlangen |
| ECN 8.6 | 1-Dec-22 | Link | 0:01:59 | Li-Ion Cells Thermal Runaway Investigations at IFPEN and New ECN Topic Construction | Michele Bardi, Matthieu Lecompte, Vincent Brocchetto, Lucas Richardet | IFPEN |
| ECN 8.6 | 1-Dec-22 | Link | 0:27:17 | Multispectral Imaging of Combustion (UV-VIS-IR) in the Optical Engine Using the Spray B Injector | Esra Bauer | Duisburg University |
| ECN 8.6 | 1-Dec-22 | Link | 0:46:10 | Analysis of Ducted Fuel Injection at High-Pressure Transcritical Conditions using Large-eddy Simulations | Jack Guo, Davy Brouzet, Wai Chung, Matthias Ihme | Stanford University |
| ECN 8.7 | 2-Feb-23 | - | - | Identifying Key Aspects of Thermal Runaway Modelling for Lithium-ion Battery Cells | Antonio Garcia, Alvaro Fogue | CMT, UPV |
| ECN 8.7 | 2-Feb-23 | Link | - | Modeling and LES of High-Pressure Liquid Injection under Evaporating and Non-Evaporating Conditions by a Real-Fluid Model and Surface Density Approach | Hesham Gaballa, Chaouki Habchi, Jean-Charles De Hemptinne | IFPEN |
| ECN 8.7 | 2-Feb-23 | - | - | Spray Characteristics and Vaporization Process of Ammonia-Ethanol blends with a Current Bosch GDI Engine Injector | Roman Pele, Christine Rousselle | University of Orleans |
| ECN 8.7 | 2-Feb-23 | - | - | Flash Boiling Process for Ammonia with One Hole Spray G Injector | Anthony Desclaux, Christine Rousselle | University of Orleans |
| ECN 8.7 | 2-Feb-23 | Link | - | Hydrogen Spray Simulation with a Hollow-Cone Injector | Abdullah Zaihi, Hong Im | KAUST |
| ECN 8.7 | 2-Feb-23 | Link | - | Using Artificial Neural Networks to Predict Synthetic Fuel Data from Limited Experimental Data | Bryn Richards, Nwabueze Emekwuru | Coventry University |
| ECN 8.8 | 2-Mar-23 | Link | 0:05:31 | Spray Computed Tomography Using Methanol and the New ECN 8-Hole Injector Donated by Borgwarner | Rafael Clemente, Zachary Buen, Meghnaa Dhanji, Kyungwon Lee, Joonsik Hwang, Lyle Pickett | FAU-Erlangen, Sandia |
| ECN 8.8 | 2-Mar-23 | Link | 0:22:18 | Hydrogen-Diesel Dual-Fuel Direct-Injection (H2DDI) Combustion under Compression-Ignition Engine Conditions | Patrick Rorimpandey, Shaun Chan, Shawn Kook, Evatt Hawkes | UNSW |
| ECN 8.8 | 2-Mar-23 | Link | 0:39:58 | Updates on High-Speed 355 nm PLIF and Schlieren Results for Spray A-3 Injector | Hyung Sub Sim, Noud Maes, Lyle Pickett, Scott Skeen, Julien Manin | Sejong University |
| ECN 8.8 | 2-Mar-23 | Link | 0:58:37 | Introducing ECN Research at NPU | Hengjie Guo | NPU Xi'An |
| ECN 8.9 | 6-Apr-23 | Link | 0:02:57 | Numerical Simulations of Ammonia Injection and Mixing Using the RFM Model | Chaouki Habchi | IFPEN |
| ECN 8.9 | 6-Apr-23 | Link | 0:26:48 | Li-Ion Battery Thermal Runaway Topic Update on Ongoing Work and Preliminary Guidelines | Michele Bardi, Antonio Martinez | IFPEN, CMT |
| ECN 8.9 | 6-Apr-23 | Link | 0:46:36 | Characterization of SAF Combustion Characteristics Using the Single Hole Atomizer | Kevin Wan, Francesco Sabatino, Julien Manin, Lyle Pickett | Sandia |
| ECN 8.11 | 1-Jun-23 | Link | 0:10:51 | Spray Computed Tomography Using Methanol and the New ECN 8-Hole Injector Donated By Borgwarner | Rafael Clemente, Zachary Buen, Meghnaa Dhanji, Kyungwon Lee, Joonsik Hwang, Lyle Pickett | FAU-Erlangen, Sandia |
| ECN 8.11 | 1-Jun-23 | Link | 0:19:26 | New "Spray M" Injector Provided by Borgwarner with Identical Patternation Specs as Spray G, but with Injection Pressure Capability > 350 Bar | Lyle Pickett, Chris Powell, Joonsik Hwang | Sandia, Argonne, MS St |
| ECN 8.11 | 1-Jun-23 | Link | 0:33:33 | Single-Hole Atomizer Breakup, From Vacuum to 20 Bar | Zachary Buen | Sandia |
| ECN 8.11 | 1-Jun-23 | Link | 0:38:51 | Trans-critical Mixing Processes for Jet-A and SAF | Julien Manin, Francesco Di Sabatino, Kevin Wan, Alex Gander, Cyril Crua, Tyler Capil, Yolanda Hicks | Sandia, U of Brighton, NASA |
| ECN 8.11 | 1-Jun-23 | Link | 0:53:55 | A Large-Eddy Simulation Model for Internal Cavitation Flows, Fuel Injection, and Mixing in Multi-Phase and Multi-Component Environments: Minimizing the Need for Tuning Parameters | Carlos Rodriguez, R. Bellini, E. Geber | City University London |
| ECN 8.11 | 1-Jun-23 | Link | 1:05:09 | ECN9 Ammonia Guidelines | Michele Battistoni | UNIPG |
| ECN 8.11 | 1-Jun-23 | Link | 1:23:24 | ECN9 Guidelines on Spray M and Methanol | Paul Lien | TU Darmstadt |
| ECN 8.12 | 6-Jul-23 | Link | 0:04:04 | Accelerated Chemistry Solving for Combustion using Neural Network: Application to H2/air combustion | Damien Aubagnac-Karkar | IFPEN |
| ECN 8.12 | 6-Jul-23 | Link | 0:22:01 | Internal and Near-Nozzle Flow of Methanol and Ammonia using the ECN Spray G Injector | Sampath Rachakonda | UMass-Amherst |
| ECN 8.12 | 6-Jul-23 | Link | 0:37:37 | Assessment of Breakup Modelling for Lagrangian Simulation of Ammonia Spray in Flash Boiling Condition | Jacopo Zembi | University of Perugia |
| ECN 9.0 | 8-Sep-23 | Introduction | 0:01:21 | ECN 9 Introduction | Lyle Pickett | Sandia |
| ECN 9.0 | 8-Sep-23 | Ammonia Ammonia Combustion in SI Engines Diesel-like Ammonia Sprays | 00:00:38 00:00:00 00:00:10 | Topic 1: Ammonia Injection and Combustion | Michele Battistoni Jose Maria Garcia-Oliver Christine Mounaim-Rousselle | Perugia CMT University D'Orleans |
| ECN 9.0 | 8-Sep-23 | Part 1 Part 2 | 00:00:11 00:00:00 | Topic 2: Intake-injection Spray G and Spray M research using methanol and PACE-20 | Lyle Pickett Rafael Clemente Mallada Paul Lien | Sandia FAU-Erlangen Darmstadt |
| ECN 9.0 | 8-Sep-23 | OME/Methanol | 0:00:00 | Topic 3: OME and Methanol Diesel Combustion | Julien Manin | Sandia |
| ECN 9.0 | 9-Sep-23 | Part 1 Part 2 | 00:00:00 00:00:00 | Topic 4: Hydrogen Injection | Noud Maes | Eindhoven |
| ECN 9.0 | 9-Sep-23 | Lithium-Ion Battery Thermal Runaway | 0:00:17 | Topic 5: Battery Safety and Thermal Runaway (Lithium-Ion) | Michele Bardi Antonio Garcia Martinez | IFPEN CMT |
| ECN 9.0 | 9-Sep-23 | Future Directions | 0:00:00 | ECN 9 Future Directions | - | - |
| ECN 9.1 | 30-Nov-23 | Link | 0:06:52 | Use of HDEV4 Injector for Future Hydrogen Injector Research | Lyle Pickett | Sandia |
| ECN 9.1 | 30-Nov-23 | Link | 0:28:55 | Modeling Considerations for Supersonic Hydrogen Injection | Steven Luna | Sandia |
| ECN 9.2 | 1-Feb-24 | Link | 0:00:37 | High-speed 1-D and 2-D Raman Scattering Measurement for Quantitative Characterization of Transient Hydrogen Jets | Bin Wu | KAUST |
| ECN 9.2 | 1-Feb-24 | Link | 0:24:31 | Experimental characterizations of the Bosch HDEV4 outward-opening injector following the recommendations from ECN | Moez Ben Houidi | KAUST |
| ECN 9.2 | 1-Feb-24 | Link | 0:38:20 | Hydrogen jet characterization via negative LIF using different tracers | Hugo Quintens | IFPEN |
| ECN 9.2 | 1-Feb-24 | Link | 1:01:42 | A Low Dissipative Solver for Simulating Under-Expanded Jets in Flash Boiling Conditions Using Real Fluid Properties | Francesco Duronio | University of L'Aquila |
| ECN 9.3 | 7-Mar-24 | Link | 0:03:01 | Fuel/Ambient/Wall Temperature Variation Using Methanol Spray M | Rafael Clemente | FAU-Erlangen |
| ECN 9.3 | 7-Mar-24 | Link | 0:18:54 | Methanol and ethanol with additive ignition using Spray D | Kevin Wan | Sandia |
| ECN 9.3 | 7-Mar-24 | Link | 0:37:39 | Numerical investigation of ammonia spray autoignition enhanced by dissolved hydrogen in Spray D configuration | Ahmad Bakir | University of Tennessee Space Institute |
| ECN 9.4 | 2-May-24 | Link | 0:02:40 | LES of diesel-spray assisted ignition of ammonia under reactivity-controlled conditions | Matthias Ihme | Stanford University |
| ECN 9.4 | 2-May-24 | Link | 0:22:13 | Effect of ambient pressure on ammonia sprays using a single-hole injector | Li Shen | Oxford University |
| ECN 9.4 | 2-May-24 | Link | 0:40:45 | Numerical Study of Liquid Ammonia Using Spray M Geometry | Aman Kumar | UMass-Lowell |
| ECN 9.5 | 6-Jun-24 | Link | 0:02:04 | Temperature Effects on Plume Dynamics of MeOH Injection | Steven Luna | Sandia |
| ECN 9.5 | 6-Jun-24 | Link | 0:26:41 | Spraylet: One-dimensional interactive cross-sectionally averaged Spray model | Vinay Kurapati | Brandenburg University of Technology |
| ECN 9.6 | 4-Jul-24 | Link | 0:08:45 | An investigation of condensation process of liquid ammonia spray during high-pressure injection | Yujin Cong | Shanghai Jiao Tong University |
| ECN 9.6 | 4-Jul-24 | Link | 0:29:40 | Computational Modeling and Validation of Hydrogen Jet in a Constant Volume Chamber | Syed M. Sameh Ali | KAIST |
| ECN 9.6 | 4-Jul-24 | Link | 0:43:23 | Fundamental Investigation of Methanol Flash Boiling Combustion under Direct Injection Conditions | Mingli Cui | Shanghai Jiao Tong University |
| ECN 9.7 | 9-Sep-24 | Link | 0:02:07 | Transient Development of Hydrogen Direct Injection | Rishi Roy | Sandia |
| ECN 9.7 | 9-Sep-24 | Link | 0:23:22 | Modeling of Hydrogen Injection | Steven Luna | Sandia |
| ECN 9.7 | 9-Sep-24 | Link | 0:45:04 | First 21700 Experiments at Sandia with Overcharge | Lyle Pickett | Sandia |
| ECN 9.8 | 3-Oct-24 | Link | 0:01:25 | Investigating Spray Morphology of Ammonia , LPG, and propane: A study on marine fuel alternatives | Fahad Almatrafi | KAUST |
| ECN 9.8 | 3-Oct-24 | Link | 0:18:26 | Computational and Physical Aspects of Hydrogen Injection | Abdullah Zaihi | KAUST |
| ECN 9.8 | 3-Oct-24 | Link | 0:40:37 | Simulations of fuel spray ignition without the computational burden - a two-stage Lagrangian approach | Yu Wang | TU/e |
| ECN 9.9 | 7-Nov-24 | Link | 0:08:03 | Gas Emissions Analysis during Thermal Runaway in Li-Ion Batteries | Lucas Richardet | IFPEN |
| ECN 9.9 | 7-Nov-24 | Link | 0:24:25 | Thermal Runaway in Li-Ion batteries: a modeling approach | Javier Gimeno | CMT |
| ECN 9.9 | 7-Nov-24 | Link | 0:42:07 | Quasi-1D modelling of fuel reactivity effects on spray combustion under diesel-like conditions | Jiawei Cao | CMT |
| ECN 9.9 | 7-Nov-24 | Link | 0:59:15 | CFD unified approach under Eulerian-Lagrangian framework for methanol and gasoline direct injection sprays in evaporative and flash boiling conditions | Francesco Duronio | U de L'Aquila |
| ECN 9.10 | 5-Dec-24 | Link | 0:03:21 | Characterization of Dimethyl Ether (DME) Spray Using ECN Spray D Under Engine-Relevant Conditions | Junghwa Yi | Sandia |
| ECN 9.10 | 5-Dec-24 | Link | 0:27:00 | Projected liquid volume correlation with mixture fraction and liquid length in turbulent Spray D | Lyle Pickett | Sandia |